The Drainless Dilemma: Why Your Samsung Washer Is Refusing To Drain

If your Samsung washer refuses to drain, don’t panic! This common issue can be resolved with a bit of troubleshooting. Here’s a comprehensive guide to help you diagnose and fix the problem.

Common Reasons for Samsung Washer Drainage Issues

• Clogged drain hose or pump: Debris, lint, or foreign objects can block the drain system.
• Faulty drain pump: The pump may fail due to wear and tear or electrical issues.
• Drain filter blockage: The drain filter traps debris and needs to be cleaned periodically.
• Damaged or kinked drain hose: The hose can become damaged or kinked, restricting water flow.
• Control board malfunction: The control board manages the washer’s operations and can malfunction, affecting the drain cycle.
• Software glitch: A software issue can disrupt the washer’s programmed functions.
• Pressure switch failure: The pressure switch detects water levels and triggers the drain cycle. If it fails, the washer may not drain properly.

Troubleshooting Steps

1. Check the Drain Hose and Pump

• Inspect the drain hose for kinks or damage.
• Disconnect the drain hose from the washer and pump.
• Check for any clogs or debris in the hose and pump.
• Use a wire or brush to clear any obstructions.

2. Clean the Drain Filter

• Locate the drain filter at the bottom front of the washer.
• Remove the filter and clean it thoroughly with water.
• Reinsert the filter securely.

3. Test the Drain Pump

• Disconnect the drain hose from the pump.
• Place a bucket under the pump.
• Run the washer in drain mode.
• If water flows out of the pump into the bucket, the pump is working correctly.

4. Reset the Control Board

• Unplug the washer from the power outlet.
• Wait a few minutes and then plug it back in.
• This may reset the control board and resolve software glitches.

5. Check the Pressure Switch

• Locate the pressure switch on the washer’s side or bottom.
• Disconnect the wires from the pressure switch.
• Use a multimeter to test the switch for continuity.
• If the switch is faulty, replace it.

6. Contact Samsung Support

• If all else fails, contact Samsung support for assistance.
• They may provide additional troubleshooting steps or dispatch a technician to repair the washer.

Tips for Preventing Drainage Issues

• Clean the drain filter regularly.
• Avoid overloading the washer.
• Use a lint trap in the washer.
• Check the drain hose for damage or kinks.
• Run the washer in hot water occasionally to clear out any clogs.

Beyond Troubleshooting

Why Won’t My Samsung Washer Drain Even After Cleaning the Filter?

• The drain pump may be faulty or the drain hose may be kinked or damaged.

Why Does My Samsung Washer Drain Slowly?

• The drain hose may be partially clogged or the drain pump may be weak.

How Do I Reset the Drain Cycle on My Samsung Washer?

• Unplug the washer and wait a few minutes. Then, plug it back in and run the washer in drain mode.

Frequently Discussed Topics

1. What is the average lifespan of a Samsung washer drain pump?

• Around 5-7 years.

2. Can I replace the drain pump myself?

• Yes, but it requires some technical skills and tools.

3. How often should I clean the drain filter?

• Every 1-2 months or more frequently if needed.