Uncover The Secret: Why Your Whirlpool Washer Refuses To Move Past Sensing
What To Know
- A faulty pressure switch can send incorrect signals to the control board, causing the washer to get stuck on “Sensing.
- A blockage in the water line can restrict the water flow to the washer, preventing it from filling up properly.
- If the incorrect cycle is selected, the washer may get stuck on “Sensing” while it attempts to determine the optimal settings.
Encountering a Whirlpool washer stuck on the “Sensing” cycle can be a frustrating experience. This issue prevents the washer from progressing through the wash cycle, leaving you with a pile of unwashed laundry. To resolve this problem, it’s crucial to understand the underlying reasons behind this malfunction.
Possible Causes and Solutions
1. Faulty Pressure Switch
The pressure switch is responsible for detecting the water level in the washer tub. A faulty pressure switch can send incorrect signals to the control board, causing the washer to get stuck on “Sensing.”
- Solution: Replace the pressure switch with a new one.
2. Clogged Drain Pump
A clogged drain pump can prevent water from draining properly, which in turn triggers the “Sensing” cycle to continue indefinitely.
- Solution: Clean out any debris or clogs from the drain pump.
3. Malfunctioning Control Board
The control board is the brain of the washer, coordinating all its functions. A malfunctioning control board can disrupt the communication between the washer’s components, causing it to get stuck on “Sensing.”
- Solution: Reset the control board by unplugging the washer from the power outlet for at least 30 minutes. If the issue persists, the control board may need to be replaced.
4. Faulty Water Inlet Valve
The water inlet valve is responsible for controlling the flow of water into the washer tub. A faulty valve can prevent the washer from filling up with enough water, triggering the “Sensing” cycle to repeat.
- Solution: Replace the water inlet valve.
5. Blockage in the Water Line
A blockage in the water line can restrict the water flow to the washer, preventing it from filling up properly.
- Solution: Check the water line for any kinks or obstructions. Clean out any debris or sediment that may be blocking the flow.
6. Incorrect Cycle Selection
Some Whirlpool washers have a “Sensing” cycle that automatically adjusts the wash settings based on the load size and fabric type. If the incorrect cycle is selected, the washer may get stuck on “Sensing” while it attempts to determine the optimal settings.
- Solution: Ensure that the correct cycle is selected for the load.
7. Power Supply Issues
A faulty power supply can disrupt the washer’s operation, causing it to get stuck on “Sensing.”
- Solution: Check the power cord and outlet to ensure that the washer is receiving a consistent power supply.
Troubleshooting Tips
- Reset the washer by unplugging it from the power outlet for at least 30 minutes.
- Clean out any debris or clogs from the drain pump.
- Inspect the water line for any kinks or obstructions.
- Verify that the correct cycle is selected for the load.
- Check the power cord and outlet to ensure a stable power supply.
When to Call a Professional
If you have tried the troubleshooting tips above and the washer is still stuck on “Sensing,” it’s recommended to contact a qualified appliance repair technician. They have the expertise and tools to diagnose and resolve complex issues.
Unlocking the Secrets of Whirlpool Washers
Understanding the reasons why a Whirlpool washer may get stuck on “Sensing” empowers you to take proactive steps towards resolving the issue. By following the troubleshooting tips outlined above, you can restore your washer to its optimal functionality and keep your laundry routine running smoothly.
Information You Need to Know
1. Why does my Whirlpool washer keep saying “Sensing”?
- Your washer may be stuck on “Sensing” due to a faulty pressure switch, clogged drain pump, malfunctioning control board, or other issues.
2. How do I reset my Whirlpool washer?
- Unplug the washer from the power outlet for at least 30 minutes to reset it.
3. What should I do if my Whirlpool washer is stuck on “Sensing” and I’ve tried all the troubleshooting tips?
- Contact a qualified appliance repair technician for professional assistance.