The Ultimate Guide To Fixing Speed Queen Washer Drainage Issues: Don’T Miss This!
What To Know
- The drain pump solenoid controls the flow of electricity to the drain pump.
- Occasionally run a drain cleaner through the drain hose to remove buildup and prevent blockages.
- Resolving drainage issues in a Speed Queen washer can be a straightforward task with the right troubleshooting steps.
If you’re facing the frustrating predicament of a Speed Queen washer that refuses to drain, you’re not alone. This common issue can be caused by a variety of factors, from minor clogs to more serious mechanical problems. In this comprehensive guide, we’ll delve into the potential causes and provide step-by-step troubleshooting tips to help you restore your washer to its draining glory.
Common Causes of Speed Queen Washer Drainage Issues
1. Clogged Drain Hose: A kinked or clogged drain hose is a common culprit behind drainage problems. Check the hose for any blockages, twists, or kinks.
2. Clogged Drain Pump: The drain pump is responsible for expelling water from the washer. A clogged pump can prevent water from draining properly.
3. Faulty Drain Pump Solenoid: The drain pump solenoid controls the flow of electricity to the drain pump. A faulty solenoid can disrupt the pump’s operation.
4. Damaged Drive Belt: The drive belt connects the motor to the transmission. A damaged or loose belt can prevent the washer from draining.
5. Defective Pressure Switch: The pressure switch detects the water level in the washer. A faulty switch can send incorrect signals, leading to drainage issues.
6. Overloaded Washer: Overloading the washer with too many clothes can strain the drain system and prevent it from draining effectively.
7. Foreign Objects: Small objects, such as coins or buttons, can get stuck in the drain hose or pump, causing blockages.
Troubleshooting Steps for a Speed Queen Washer That Won’t Drain
1. Inspect and Clean the Drain Hose: Unplug the washer and check the drain hose for blockages or kinks. Remove any visible debris and straighten out the hose.
2. Test the Drain Pump: Disconnect the washer’s power supply. Remove the drain pump and inspect it for any obstructions. Use a flashlight to shine inside the pump and check for any debris or damage.
3. Check the Drain Pump Solenoid: Unplug the washer. Locate the drain pump solenoid and disconnect it from the power supply. Use a multimeter to test the solenoid for continuity.
4. Inspect the Drive Belt: Open the washer’s rear panel. Locate the drive belt and inspect it for any damage or looseness. Adjust the tension of the belt if necessary.
5. Test the Pressure Switch: Unplug the washer. Remove the pressure switch and blow through the inlet port. If you don’t feel any air resistance, the switch may be faulty.
6. Reduce the Load: Avoid overloading the washer. Ensure that the load is evenly distributed and not exceeding the washer’s capacity.
7. Remove Foreign Objects: Check the drain hose and pump for any foreign objects that may be causing blockages. Remove any debris you find.
Additional Tips for Preventing Drainage Issues
- Clean the Drain Hose Regularly: Clean the drain hose every few months to prevent clogs.
- Use Drain Cleaner: Occasionally run a drain cleaner through the drain hose to remove buildup and prevent blockages.
- Avoid Overloading: Don’t overload the washer to prevent strain on the drain system.
- Inspect Foreign Objects: Check the pockets of clothes before washing to prevent small objects from getting into the washer and causing blockages.
Final Thoughts
Resolving drainage issues in a Speed Queen washer can be a straightforward task with the right troubleshooting steps. By following the guidance outlined in this guide, you can diagnose and fix the problem effectively, restoring your washer to its optimal performance. Remember to practice preventive measures to minimize the risk of future drainage issues and enjoy a smoothly functioning washer for years to come.
Basics You Wanted To Know
Q: Why is my Speed Queen washer not draining even after I cleaned the drain hose?
A: Check the drain pump, solenoid, drive belt, and pressure switch for potential issues.
Q: How often should I clean the drain hose on my Speed Queen washer?
A: Clean the drain hose every few months to prevent clogs and ensure optimal drainage.
Q: Can I use bleach to clean the drain hose of my Speed Queen washer?
A: No, do not use bleach to clean the drain hose. Use a drain cleaner specifically designed for washing machines instead.
