Uncover The Mystery: Why Your Whirlpool Dishwasher Isn’T Draining – Fix It Fast
What To Know
- One of the most common causes of a clogged dishwasher is a blockage in the drain hose.
- If the filter is dirty, it can restrict the flow of water and cause the dishwasher to not drain properly.
- A clogged drain hose, a faulty drain pump, or a blocked air gap can all contribute to a slow draining dishwasher.
If you’re facing the frustration of a Whirlpool dishwasher that refuses to drain, you’re not alone. This common issue can be caused by a range of factors. In this comprehensive guide, we’ll delve into the possible reasons why your dishwasher isn‘t draining and provide you with step-by-step troubleshooting solutions.
Clogged Drain Hose
One of the most common causes of a clogged dishwasher is a blockage in the drain hose. Food particles, grease, and other debris can accumulate over time, obstructing the flow of water.
Solution:
1. Disconnect the drain hose from the dishwasher and the sink drain.
2. Use a flashlight to inspect the hose for any visible blockages.
3. If you find a clog, use a drain snake or a pair of pliers to remove it.
4. Flush the hose with clean water to remove any remaining debris.
Faulty Drain Pump
The drain pump is responsible for pumping water out of the dishwasher. If the pump fails, the dishwasher will not be able to drain properly.
Solution:
1. Locate the drain pump at the bottom of the dishwasher.
2. Check if the pump is humming or making any unusual noises.
3. If the pump is not working, it may need to be replaced.
Blocked Air Gap
An air gap is a small device installed above the sink that prevents dirty water from flowing back into the dishwasher. If the air gap is blocked, it can cause drainage problems.
Solution:
1. Locate the air gap on the counter or sink.
2. Unscrew the air gap and remove any debris or blockages.
3. Clean the air gap with a vinegar solution.
Kinked Drain Hose
A kinked drain hose can restrict the flow of water, causing the dishwasher to not drain properly.
Solution:
1. Inspect the drain hose for any kinks or bends.
2. Straighten out the hose and secure it in place.
Faulty Door Latch
If the dishwasher door latch is not working properly, the dishwasher may not be able to complete the drain cycle.
Solution:
1. Open and close the dishwasher door several times to test the latch.
2. If the latch is not engaging properly, it may need to be replaced.
Overloaded Dishwasher
Overloading the dishwasher can prevent the dishes from being properly cleaned and drained.
Solution:
1. Avoid overloading the dishwasher with too many dishes.
2. Load the dishes in a way that allows water to flow freely around them.
Dirty Filter
The filter in the dishwasher traps food particles and other debris. If the filter is dirty, it can restrict the flow of water and cause the dishwasher to not drain properly.
Solution:
1. Locate the filter at the bottom of the dishwasher.
2. Remove the filter and clean it with a brush or a sponge.
3. Rinse the filter with clean water before replacing it.
Frequently Asked Questions
Q: Why does my Whirlpool dishwasher take a long time to drain?
A: A clogged drain hose, a faulty drain pump, or a blocked air gap can all contribute to a slow draining dishwasher.
Q: How do I reset my Whirlpool dishwasher?
A: To reset your Whirlpool dishwasher, press and hold the “Cancel/Drain” button for three seconds.
Q: What is the average lifespan of a Whirlpool dishwasher?
A: The average lifespan of a Whirlpool dishwasher is around 10 years.