Why Is My Speed Queen Washer Behaving Oddly? The Blinking Truth Revealed

If you’ve encountered a blinking Speed Queen washer, it can be frustrating and concerning. Understanding the reasons behind this blinking can help you troubleshoot the issue effectively. In this comprehensive guide, we’ll explore the most common causes and provide step-by-step solutions to get your washer back in working order.

Blinking Lights and Their Meanings

Speed Queen washers use blinking lights to indicate error codes. Each blinking pattern corresponds to a specific problem. Here are the most common blinking patterns and their meanings:

• 1 Blink: Water fill fault
• 2 Blinks: Water drain fault
• 3 Blinks: Door lock fault
• 4 Blinks: Spin speed sensor fault
• 5 Blinks: Motor control fault
• 6 Blinks: Water temperature sensor fault
• 7 Blinks: Pressure switch fault
• 8 Blinks: Overheating fault

Troubleshooting Common Blinking Issues

1. Water Fill Fault (1 Blink)

• Cause: The washer is not filling with water.
• Solution: Check the water supply hoses for kinks or blockages. Ensure that the water valves are open.

2. Water Drain Fault (2 Blinks)

• Cause: The washer is not draining water properly.
• Solution: Clean the drain hose for any obstructions. Check the drain pump for any blockages.

3. Door Lock Fault (3 Blinks)

• Cause: The washer door is not locking properly.
• Solution: Close the door firmly and ensure that the latch is engaged. If the problem persists, the door lock mechanism may need to be replaced.

4. Spin Speed Sensor Fault (4 Blinks)

• Cause: The washer is not able to detect the spin speed.
• Solution: Unplug the washer for 30 seconds. If the problem persists, the spin speed sensor may need to be replaced.

5. Motor Control Fault (5 Blinks)

• Cause: The washer’s motor is not functioning properly.
• Solution: Unplug the washer for 30 seconds. If the problem persists, the motor or motor control board may need to be replaced.

6. Water Temperature Sensor Fault (6 Blinks)

• Cause: The washer is not able to detect the water temperature.
• Solution: Unplug the washer for 30 seconds. If the problem persists, the water temperature sensor may need to be replaced.

7. Pressure Switch Fault (7 Blinks)

• Cause: The washer is not able to detect the water level.
• Solution: Unplug the washer for 30 seconds. If the problem persists, the pressure switch may need to be replaced.

8. Overheating Fault (8 Blinks)

• Cause: The washer is overheating.
• Solution: Unplug the washer for 30 seconds. Check the water supply hoses for any kinks or blockages. Ensure that the washer is properly ventilated.

Advanced Troubleshooting

If the above troubleshooting steps do not resolve the blinking issue, you may need to contact a qualified appliance repair technician for further assistance. Advanced troubleshooting may involve:

• Testing electrical components with a multimeter
• Replacing faulty wiring or components
• Resetting the washer’s control board

Prevention and Maintenance Tips

To prevent blinking issues and extend the life of your Speed Queen washer, follow these maintenance tips:

• Clean the lint filter regularly.
• Use the correct detergent and fabric softener.
• Avoid overloading the washer.
• Run a monthly cleaning cycle with a washing machine cleaner.
• Check the water supply hoses and drain hose periodically for any damage.

What to Do When Your Speed Queen Washer Blinks

When you see your Speed Queen washer blinking, don’t panic. Identify the blinking pattern and use this guide to troubleshoot the issue. By following the steps outlined above, you can often resolve the problem yourself. If the issue persists or you are uncomfortable performing advanced troubleshooting, contact a qualified appliance repair technician for assistance.

Information You Need to Know

Q: Why is my Speed Queen washer blinking 1 time?
A: This indicates a water fill fault. Check the water supply hoses and valves.

Q: What does it mean when my Speed Queen washer blinks 3 times?
A: This indicates a door lock fault. Close the door firmly and ensure the latch is engaged.

Q: How do I reset my Speed Queen washer if it’s blinking?
A: Unplug the washer for 30 seconds, then plug it back in. This may reset the control board.