Baffled By Your Samsung Washer’S Self-Cleaning Blinker? We Have Answers

Are you facing an issue where your Samsung washer is blinking the “Self Clean” light repeatedly? This can be a frustrating experience, especially if you’re not sure what the problem is. In this blog post, we will delve into the possible causes behind this blinking issue and provide step-by-step solutions to help you resolve it effectively.

Understanding the Self Clean Cycle

The Self Clean cycle in Samsung washers is designed to remove dirt, detergent residue, and other buildup that can accumulate over time. When the cycle is activated, the washer will fill with hot water and run a series of high-speed spins to agitate the water and dislodge any debris.

Possible Causes of Blinking Self Clean Light

There are several reasons why your Samsung washer may be blinking the Self Clean light:

• Debris in the Drain Pump: Over time, lint, hair, and other objects can become trapped in the drain pump, preventing it from draining water properly. This can cause the washer to stop the Self Clean cycle and blink the light.
• Clogged Drain Hose: The drain hose can also become clogged with debris, preventing water from draining out. This can also trigger the Self Clean light to blink.
• Faulty Water Inlet Valve: The water inlet valve controls the flow of water into the washer. If the valve is faulty, it may not open or close properly, which can interrupt the Self Clean cycle and cause the light to blink.
• Damaged Pressure Switch: The pressure switch monitors the water level in the washer. If the switch is damaged, it may not be able to detect the correct water level, causing the washer to stop the Self Clean cycle and blink the light.
• Faulty Control Board: The control board is the brain of the washer and controls all of its functions. If the control board is faulty, it may send incorrect signals to the other components, causing the Self Clean light to blink.

Troubleshooting Steps

To troubleshoot the blinking Self Clean light issue, follow these steps:

1. Check for Debris in the Drain Pump: Unplug the washer and disconnect the water hoses. Remove the drain pump cover and inspect it for any debris. Remove any objects you find and clean the pump.
2. Inspect the Drain Hose: Disconnect the drain hose from the back of the washer and check for any clogs. Use a flashlight to inspect the inside of the hose and remove any debris you find.
3. Test the Water Inlet Valve: Turn on the water supply and check if water is flowing into the washer. If there is no water flow, the water inlet valve may be faulty and need to be replaced.
4. Check the Pressure Switch: Disconnect the pressure switch from the washer and use a multimeter to test its continuity. If the switch is faulty, it will need to be replaced.
5. Inspect the Control Board: The control board is located behind the washer’s front panel. Carefully remove the front panel and inspect the control board for any signs of damage, such as burnt or blown components. If the control board is damaged, it will need to be replaced.

Additional Tips

• Reset the Washer: Sometimes, a simple reset can resolve the blinking Self Clean light issue. Unplug the washer for 30 seconds and then plug it back in. This will reset the control board and may clear the error.
• Clean the Washer Regularly: Regular cleaning of your Samsung washer can help prevent dirt and debris from accumulating and causing problems. Use a washer cleaner or vinegar to clean the inside of the washer every few months.
• Contact Samsung Support: If you are unable to resolve the blinking Self Clean light issue on your own, contact Samsung Support for assistance. They can provide you with further troubleshooting tips or schedule a repair technician to come to your home.

Wrapping Up

Understanding the reasons behind your Samsung washer’s blinking Self Clean light is the first step to resolving the issue. By following the troubleshooting steps outlined in this blog post, you can identify the underlying cause and take the necessary steps to fix it. Remember to always unplug the washer before performing any repairs and to contact Samsung Support if you encounter any difficulties.