Unveiling The Mystery: Why Is My Bissell Vacuum Throwing Up? Get The Answers Here!

If your Bissell vacuum has become a reluctant spitter, leaving behind a trail of debris in its wake, you’re not alone. This frustrating issue can stem from various underlying causes. In this comprehensive guide, we’ll delve into the reasons why your Bissell vacuum is spitting stuff back out and provide practical solutions to restore its pristine performance.

Clogged Filter

A clogged filter is a common culprit behind vacuum spitting. Over time, dust, dirt, and other particles accumulate on the filter, restricting airflow and causing the vacuum to spit back debris. To resolve this issue:

• Remove and rinse the filter under running water.
• Allow the filter to dry completely before reinstalling it.
• Replace the filter every 3-6 months for optimal performance.

Full Dirt Tank

When the dirt tank is full, the vacuum may struggle to effectively separate dirt from the air. This can lead to debris being spit back out through the exhaust. To empty the dirt tank:

• Disconnect the vacuum from the power source.
• Remove the dirt tank from the vacuum.
• Empty the contents into a trash can.
• Reinstall the dirt tank securely.

Obstructed Hose or Nozzle

A blockage in the hose or nozzle can also cause the vacuum to spit stuff back out. Debris, hair, or other objects can get stuck and prevent the airflow from passing through properly. To check for obstructions:

• Disconnect the hose from the vacuum and inspect it for any visible blockages.
• Remove any obstructions and reconnect the hose.
• Check the nozzle for any clogs and remove them accordingly.

Worn or Damaged Belt

The belt in your Bissell vacuum plays a crucial role in rotating the brush roll and maintaining suction. A worn or damaged belt can slip or break, causing the vacuum to spit back debris. To check the belt:

• Turn the vacuum upside down and remove the bottom plate.
• Inspect the belt for signs of wear or damage.
• Replace the belt if necessary.

Dirty Brush Roll

A dirty brush roll can accumulate hair, dirt, and other debris, which can then be spit back out by the vacuum. To clean the brush roll:

• Remove the bottom plate of the vacuum.
• Use scissors to cut away any tangled hair or debris.
• Wash the brush roll with warm, soapy water.
• Allow the brush roll to dry completely before reinstalling it.

Low Suction Power

Insufficient suction power can prevent the vacuum from effectively removing debris, leading to it being spit back out. To check the suction power:

• Place your hand over the nozzle of the vacuum.
• Turn on the vacuum and feel for the suction.
• If the suction is weak, there may be an issue with the motor or fan.

Other Possible Causes

In some cases, other factors can contribute to your Bissell vacuum spitting stuff back out, such as:

• Overheating: If the vacuum is used excessively or the filters are clogged, it can overheat and spit back debris.
• Faulty motor: A malfunctioning motor can affect the suction power and cause spitting.
• Damaged fan blades: Broken or bent fan blades can disrupt airflow and lead to spitting.

What to Do If Your Bissell Vacuum Is Still Spitting Stuff Back Out

If you have tried the solutions outlined above and your Bissell vacuum is still spitting stuff back out, it may be necessary to contact Bissell customer support for further assistance. They can provide additional troubleshooting tips or arrange for a repair if needed.

Questions We Hear a Lot

Q: Why does my Bissell vacuum spit out water?
A: If your Bissell vacuum is spitting out water, it may be due to a clogged filter or a full dirt tank. Empty the dirt tank and rinse the filter to resolve the issue.

Q: Why does my Bissell vacuum smell bad?
A: A foul odor from your Bissell vacuum can indicate a dirty filter, clogged hose, or full dirt tank. Clean or replace the filter, remove any obstructions from the hose, and empty the dirt tank to eliminate the odor.

Q: How often should I clean my Bissell vacuum filter?
A: It is recommended to clean the Bissell vacuum filter every 3-6 months or more frequently if used in a dusty environment.