Why Is My Bissell Vacuum Blowing Out Dust? The Shocking Truth Revealed

Vacuum cleaners, like any other household appliance, can occasionally encounter issues that hamper their performance. One common problem that Bissell vacuum owners face is the frustrating experience of their vacuum blowing out dust instead of effectively removing it. This can be a major annoyance, leaving surfaces covered in a fine layer of debris. In this comprehensive blog post, we will delve into the potential causes behind this issue and provide practical solutions to resolve it.

Common Causes of Dust Blowing Out of Bissell Vacuums

1. Clogged Filter: A clogged filter is a primary culprit for dust escaping from your Bissell vacuum. Filters trap dirt and debris, and when they become saturated, airflow can be restricted, causing dust to be blown out.

2. Full Dustbin: An overflowing dustbin can also lead to this problem. When the dustbin is full, there is no space for the vacuum to collect additional dirt and dust, resulting in it being expelled back into the air.

3. Damaged Gasket: A damaged gasket around the filter or dustbin can create openings for dust to escape. This can occur due to wear and tear or improper handling of the vacuum parts.

4. Leaking Hose: A leak in the hose can cause a loss of suction, preventing the vacuum from effectively removing dust. This can lead to dust being blown out of the exhaust port.

5. Motor Issues: In rare cases, motor issues can affect the vacuum’s suction power. A weak motor may not be able to generate sufficient airflow, resulting in dust being blown out.

Troubleshooting and Solutions

1. Clean or Replace the Filter: Regularly cleaning or replacing the filter is crucial for optimal vacuum performance. Remove the filter and wash it thoroughly with warm water. Allow it to dry completely before reinserting it. If the filter is damaged or worn, replace it with a new one.

2. Empty the Dustbin: Empty the dustbin after every use or when it reaches the “full” indicator. This ensures that there is ample space for the vacuum to collect dust and debris.

3. Inspect and Replace the Gasket: Check the gaskets around the filter and dustbin for any tears or damage. Replace any damaged gaskets with new ones to ensure a tight seal.

4. Examine the Hose for Leaks: Inspect the hose for any visible leaks or holes. If a leak is found, replace the hose with a new one.

5. Contact Bissell Support: If the issue persists despite following the above steps, contact Bissell customer support for further assistance. They may be able to provide additional troubleshooting tips or recommend professional repairs.

Additional Tips for Preventing Dust Blowout

1. Use the Correct Vacuum Setting: Bissell vacuums have different settings for different floor types. Select the appropriate setting to optimize suction power and prevent dust from blowing out.

2. Avoid Overfilling the Dustbin: Pay attention to the “full” indicator on the dustbin and empty it promptly when it becomes full. Overfilling can lead to dust escaping through the exhaust port.

3. Clean the Vacuum Regularly: Regular cleaning of the vacuum, including the filter, dustbin, and other components, helps maintain its performance and prevents dust accumulation.

4. Use a HEPA Filter: HEPA filters are highly efficient in trapping small particles, including dust and allergens. Consider using a HEPA filter in your Bissell vacuum to minimize dust blowout.

Alternatives to Troubleshooting

If troubleshooting fails to resolve the issue, consider the following alternatives:

1. Professional Repair: Contact a qualified vacuum repair technician to diagnose and repair the vacuum. This may involve replacing damaged components or adjusting internal settings.

2. Vacuum Exchange: If the vacuum is still under warranty, contact Bissell for a possible exchange or replacement.

The Final Word

Addressing the issue of your Bissell vacuum blowing out dust requires a systematic approach. By following the troubleshooting steps outlined in this blog post, you can identify and resolve the underlying cause. Remember to practice regular maintenance and cleaning to prevent future dust blowout issues. If the problem persists, do not hesitate to contact Bissell support or consider professional repair or exchange options.

Frequently Asked Questions

Q: Why is my Bissell vacuum blowing out dust after I just cleaned the filter?

A: The filter may still be clogged or damaged. Try replacing it with a new one. Additionally, check the gasket around the filter for any tears or damage.

Q: I’ve checked everything and my vacuum is still blowing out dust. What should I do?

A: Contact Bissell customer support for further assistance. They may be able to provide additional troubleshooting tips or recommend professional repairs.

Q: Can using a different type of filter help prevent dust blowout?

A: Yes, consider using a HEPA filter, which is highly efficient in trapping small particles, including dust and allergens.