Why Is My Amana Washer Not Agitating? The Shocking Truth Revealed

If your Amana washer is giving you trouble by not agitating, don’t panic. This common issue can often be resolved with a few simple troubleshooting steps. In this comprehensive guide, we will delve into the possible causes and provide detailed solutions to get your washer back in working order.

Causes of Non-Agitation in Amana Washers

• Faulty Lid Switch: The lid switch prevents the washer from operating when the lid is open. A malfunctioning lid switch can signal the washer to stop agitating.
• Broken Agitator Dogs: These small gears connect the agitator to the transmission. If they break or wear out, the agitator will not turn.
• Worn Transmission: The transmission powers the agitator. If it becomes worn or damaged, it may not be able to provide enough power to agitate the clothes.
• Clogged Drain Pump: A blocked drain pump can prevent the washer from draining properly, causing it to stop agitating.
• Electrical Issues: Wiring problems or a faulty motor can disrupt the power supply to the agitator.

Troubleshooting Steps

1. Check the Lid Switch

• Open and close the washer lid several times.
• If the agitator starts working, the lid switch is likely faulty and needs to be replaced.

2. Inspect the Agitator Dogs

• Remove the agitator by pulling it straight up.
• Check the agitator dogs for any damage or wear.
• Replace the agitator dogs if necessary.

3. Examine the Transmission

• Inspect the transmission for any leaks or damage.
• If you notice any issues, it may need to be repaired or replaced.

4. Clean the Drain Pump

• Locate the drain pump filter at the bottom of the washer.
• Remove the filter and clean it thoroughly.
• Reinstall the filter and check if the agitator is working.

5. Inspect Electrical Connections

• Check the wiring connections to the motor and transmission.
• Ensure that all wires are securely connected and not damaged.
• If necessary, replace any damaged wires or connectors.

Additional Tips

• Reset the Washer: Unplug the washer for a few minutes to reset it.
• Use the Correct Detergent: Using too much detergent can create suds that interfere with agitation.
• Check the Load Size: Overloading the washer can prevent the agitator from moving properly.
• Contact an Appliance Repair Technician: If you are unable to resolve the issue yourself, contact a qualified appliance repair technician for assistance.

Unraveling the Agitation Enigma

Now that we have explored the common causes and troubleshooting steps, let’s summarize the key points:

• The lid switch, agitator dogs, transmission, drain pump, and electrical issues can all contribute to non-agitation in Amana washers.
• Troubleshooting involves checking the lid switch, inspecting the agitator dogs, examining the transmission, cleaning the drain pump, and inspecting electrical connections.
• If the issue persists, resetting the washer, using the correct detergent, checking the load size, or contacting an appliance repair technician may be necessary.

What People Want to Know

1. What is the most common cause of non-agitation in Amana washers?
A: Malfunctioning lid switches are a frequent culprit.

2. How do I know if the agitator dogs are broken?
A: Broken agitator dogs will prevent the agitator from turning.

3. Can I replace the transmission myself?
A: Replacing the transmission is a complex repair that should be performed by a qualified technician.