[Urgent] Amana Washer Clicking? Here’S Why And How To Fix It Asap!
What To Know
- Check the circuit breaker or fuse box to make sure that the circuit powering the washer is not tripped or blown.
- The lid switch is a safety feature that prevents the washer from operating when the lid is open.
- Check if the lid is properly closed and that the lid switch is not damaged.
If your Amana washer is just clicking but not starting, it can be a frustrating experience. There are several potential reasons why this might happen, but don’t worry – in most cases, it’s a relatively easy fix. This troubleshooting guide will walk you through the most common causes of this issue and provide step-by-step instructions on how to resolve them.
1. Check the Power Supply
- Ensure that the washer is properly plugged into a working electrical outlet.
- Check the circuit breaker or fuse box to make sure that the circuit powering the washer is not tripped or blown.
2. Inspect the Lid Switch
- The lid switch is a safety feature that prevents the washer from operating when the lid is open.
- Check if the lid is properly closed and that the lid switch is not damaged.
- If the lid switch is faulty, it will need to be replaced.
3. Examine the Door Lock
- The door lock is a mechanism that keeps the washer door securely closed during operation.
- Ensure that the door is properly closed and that the door lock is engaged.
- If the door lock is not functioning correctly, it will need to be repaired or replaced.
4. Check the Water Supply
- Make sure that the water supply valves are turned on and that there is sufficient water pressure.
- Inspect the water hoses for any leaks or kinks and replace them if necessary.
5. Inspect the Drain Pump
- The drain pump removes water from the washer after the wash cycle.
- Check if the drain hose is clogged or kinked and clear any obstructions.
- If the drain pump is faulty, it will need to be replaced.
6. Examine the Motor
- The motor is responsible for rotating the washer drum.
- Listen for any unusual noises or vibrations coming from the motor.
- If the motor is damaged or malfunctioning, it will need to be repaired or replaced.
7. Reset the Washer
- Sometimes, a simple reset can resolve the clicking issue.
- Unplug the washer from the power outlet and wait for a few minutes.
- Plug the washer back in and try running a cycle.
Troubleshooting Tips
- If you are not comfortable performing the troubleshooting steps yourself, it is recommended to contact a qualified appliance repair technician.
- Always unplug the washer from the power outlet before performing any maintenance or repairs.
- Refer to your washer’s user manual for specific troubleshooting instructions and safety precautions.
Conclusion: Resolving the Clicking Issue
By following the steps outlined in this guide, you can effectively troubleshoot and resolve the clicking issue with your Amana washer. Remember, most of these fixes are relatively simple and can be performed by anyone with basic DIY skills. If you encounter any difficulties or the issue persists after trying the troubleshooting steps, do not hesitate to seek professional assistance.
Frequently Asked Questions (FAQs)
Q: Why is my Amana washer clicking and humming but not spinning?
A: This could be due to a faulty motor or a problem with the drive belt.
Q: What does it mean when my Amana washer clicks three times?
A: Three clicks usually indicate an issue with the water supply or drain system.
Q: How do I reset my Amana washer?
A: Unplug the washer, wait a few minutes, and then plug it back in.
Q: Why is my Amana washer clicking and not draining?
A: Check the drain hose for clogs or kinks, and ensure that the drain pump is functioning properly.
Q: What should I do if my Amana washer clicks and fills with water but doesn’t wash?
A: Inspect the lid switch and door lock for any issues, and ensure that the water supply is adequate.