Unlock The Secret: Why Your Ge Washer Stays Soaked
What To Know
- If your GE washer is refusing to drain, leaving you with a pool of water at the bottom of your laundry appliance, it can be a frustrating and inconvenient problem.
- The air gap is a small device installed on the drain hose to prevent wastewater from flowing back into the washer.
- Some common causes include a clogged drain filter, a kinked or blocked drain hose, a faulty drain pump, or a blocked air gap.
If your GE washer is refusing to drain, leaving you with a pool of water at the bottom of your laundry appliance, it can be a frustrating and inconvenient problem. But don’t worry, in this comprehensive guide, we’ll delve into the possible reasons why your GE washer won’t drain and provide you with step-by-step troubleshooting tips to help you resolve the issue effectively.
Understanding the Drainage System
The drainage system in a GE washer is responsible for removing water from the tub after the washing cycle is complete. It consists of several components, including the drain pump, drain hose, and drain filter. If any of these components malfunction, it can lead to drainage problems.
Troubleshooting Why GE Washer Won’t Drain
1. Check for Clogged Drain Filter
The drain filter is a small mesh screen located at the bottom of the washer tub. It traps lint, hair, and other debris to prevent them from clogging the drain hose and pump. If the drain filter is clogged, water will not be able to drain properly.
Solution: Open the access panel at the bottom of the washer and remove the drain filter. Clean the filter thoroughly with hot water and a brush.
2. Inspect the Drain Hose
The drain hose carries water from the washer to the drain pipe. Kinks, clogs, or blockages in the hose can prevent water from draining.
Solution: Unplug the washer and disconnect the drain hose from both the washer and the drain pipe. Check the hose for any kinks or blockages. If the hose is clogged, use a drain snake or a wet/dry vacuum to clear the obstruction.
3. Examine the Drain Pump
The drain pump is a small motor that pumps water out of the washer. If the drain pump is faulty, it will not be able to drain water from the tub.
Solution: To check the drain pump, first unplug the washer. Then, locate the drain pump at the bottom of the washer and disconnect the hoses and electrical wires connected to it. Use a multimeter to test the continuity of the drain pump. If the pump is not receiving power or is not working properly, it needs to be replaced.
4. Check for Blockages in the Air Gap
The air gap is a small device installed on the drain hose to prevent wastewater from flowing back into the washer. If the air gap is blocked, it can create a vacuum that prevents water from draining.
Solution: Locate the air gap on the drain hose and remove the cap. Check for any debris or blockages inside the air gap. Clean the air gap thoroughly and replace the cap.
5. Inspect the Lid Switch
The lid switch is a safety mechanism that prevents the washer from operating when the lid is open. If the lid switch is faulty, it can prevent the washer from draining.
Solution: Open and close the washer lid several times to ensure that the lid switch is working properly. If the lid switch is not working, it needs to be replaced.
6. Check for Faulty Control Board
The control board is the brain of the washer and controls all of its functions, including the drainage system. If the control board is faulty, it can prevent the washer from draining.
Solution: Diagnosing and repairing a faulty control board is complex and should be left to a qualified appliance repair technician.
Wrapping Up
If you have followed the troubleshooting steps outlined above and still cannot get your GE washer to drain, it is recommended to contact a qualified appliance repair technician. They can diagnose the problem accurately and perform the necessary repairs to restore your washer to proper working order.
Top Questions Asked
1. Why is my GE washer not draining completely?
There could be several reasons why your GE washer is not draining completely. Some common causes include a clogged drain filter, a kinked or blocked drain hose, a faulty drain pump, or a blocked air gap.
2. Can I fix a GE washer that won’t drain myself?
While some drainage problems can be resolved by following simple troubleshooting steps, such as cleaning the drain filter or inspecting the drain hose, more complex issues, such as a faulty drain pump or control board, should be handled by a qualified appliance repair technician.
3. How much does it cost to repair a GE washer that won’t drain?
The cost of repairing a GE washer that won’t drain depends on the cause of the problem. Minor issues, such as a clogged drain filter, can be fixed for a few dollars. More complex repairs, such as replacing the drain pump or control board, can cost hundreds of dollars.