The Root Cause Revealed: Why Your Lg Washer Prefers To Explore

An LG washer is a reliable and efficient appliance, but it can be frustrating when it starts to move excessively during the wash cycle. If your LG washer is experiencing this issue, you may be wondering why and what you can do to fix it. In this blog post, we will delve into the potential causes behind this problem and provide comprehensive solutions to help you resolve it effectively.

Causes of Excessive Washer Movement

1. Uneven Load Distribution: An unbalanced load can cause your washer to shake and move excessively. Ensure that clothes are evenly distributed within the drum to prevent this issue.

2. Worn-Out Shock Absorbers: Shock absorbers help absorb vibrations and stabilize the washer during operation. Worn-out shock absorbers can lead to excessive movement.

3. Loose or Damaged Feet: The feet of the washer provide support and stability. Loose or damaged feet can cause the washer to wobble and move.

4. Uneven Floor Surface: If the floor where the washer is placed is uneven, it can cause the washer to rock and move during the spin cycle.

5. Overloading the Washer: Exceeding the washer’s recommended load capacity can put excessive strain on the machine, leading to instability and movement.

6. Improper Installation: If the washer is not properly leveled or secured during installation, it can result in excessive movement.

7. Faulty Electronics: In rare cases, a faulty electronic control module can cause the washer to behave erratically, including excessive movement.

Solutions to Fix Washer Movement

1. Rebalance the Load: Pause the wash cycle and redistribute the clothes evenly within the drum. Start the cycle again to see if the movement has subsided.

2. Replace Worn Shock Absorbers: If the shock absorbers are worn out, they need to be replaced. Consult the washer’s user manual or contact an authorized repair technician for assistance.

3. Tighten or Replace Washer Feet: Inspect the washer’s feet and tighten any loose screws. If the feet are damaged, they need to be replaced.

4. Level the Floor Surface: If the floor is uneven, use shims or a leveling kit to create a stable surface for the washer.

5. Avoid Overloading the Washer: Follow the recommended load capacity indicated in the washer’s manual.

6. Re-Install the Washer: If the washer was not properly installed initially, have it re-installed by a qualified technician to ensure it is level and secure.

7. Contact LG Support: If the issue persists after trying the above solutions, contact LG customer support for further assistance. They may be able to diagnose the problem and provide additional guidance.

Preventative Measures

1. Use a Laundry Bag: Delicate items or small garments can be placed in a laundry bag to prevent them from becoming unbalanced during the wash cycle.

2. Clean the Washer Regularly: Build-up of detergent residue and lint can affect the washer’s balance. Clean the washer regularly according to the manufacturer’s instructions.

3. Level the Washer Periodically: Over time, the washer may become slightly unlevel. Use a level to check the washer’s alignment and adjust the feet if necessary.

4. Avoid Placing Heavy Objects on Top: Never place heavy objects on top of the washer, as this can destabilize it and lead to movement.

Troubleshooting Tips

1. Check for Obstructions: Ensure that there are no objects stuck under the washer that could prevent it from sitting evenly on the floor.

2. Inspect the Drain Hose: A kinked or blocked drain hose can cause the washer to vibrate excessively. Check the hose for any obstructions or damage.

3. Run a Diagnostic Cycle: Some LG washers have a built-in diagnostic cycle that can help identify potential issues. Refer to the user manual for instructions on how to run the diagnostic cycle.

4. Reset the Washer: Unplug the washer for a few minutes and then plug it back in. This may reset the electronics and resolve any temporary issues.

Answers to Your Most Common Questions

1. Why is my LG washer shaking violently?

Excessive shaking can be caused by an unbalanced load, worn-out shock absorbers, or a loose or damaged component.

2. How can I stop my LG washer from vibrating?

Rebalance the load, replace worn shock absorbers, tighten loose feet, level the floor surface, and avoid overloading the washer.

3. Can I fix a moving LG washer myself?

Yes, you can try some basic troubleshooting steps like rebalancing the load, tightening the feet, and leveling the washer. However, if the issue persists, it is recommended to contact an authorized repair technician.