Unveiling The Secret: Unlocking The Mystery Behind Lg Dryer’S Flowsense Issue

If your LG dryer has been plaguing you with the enigmatic “Flowsense” error message, you’re not alone. This frustrating issue can disrupt your laundry routine and leave you wondering what went wrong. To help you troubleshoot this problem effectively, let’s delve into the intricacies of Flowsense and its potential causes.

Understanding Flowsense

Flowsense is a safety feature incorporated into LG dryers to prevent overheating. It monitors the airflow through the dryer’s exhaust duct and ensures that it doesn’t become obstructed. If the airflow becomes restricted, the dryer will display the Flowsense error message and stop the drying cycle to protect itself from damage.

Common Causes of Flowsense Errors

1. Clogged Exhaust Duct:

The most common cause of Flowsense errors is a clogged exhaust duct. Lint, dust, and debris can accumulate in the duct over time, restricting airflow.

2. Kinked or Crushed Exhaust Hose:

If the exhaust hose connecting the dryer to the vent is kinked or crushed, it can also hinder airflow.

3. Blocked Dryer Vent:

The dryer vent located outside your home can become blocked by leaves, bird nests, or other obstructions.

4. Damaged Exhaust Fan:

In rare cases, the exhaust fan within the dryer may become damaged or malfunction, leading to inadequate airflow.

Troubleshooting Flowsense Errors

1. Inspect the Exhaust Duct:

Disconnect the exhaust duct from the dryer and check for any blockages or obstructions. Use a flashlight to illuminate the duct and remove any lint or debris.

2. Check the Exhaust Hose:

Inspect the exhaust hose for any kinks or crushes. If the hose is damaged, replace it with a new one of the same length and diameter.

3. Clear the Dryer Vent:

Go outside and locate the dryer vent. Remove any visible obstructions, such as leaves or bird nests. Use a vent cleaning brush to dislodge any debris from the vent.

4. Test the Exhaust Fan:

With the dryer unplugged, manually rotate the exhaust fan blades. They should spin freely without any resistance. If the fan is damaged, it will need to be replaced.

Resetting the Flowsense Error

Once you have addressed the underlying cause of the Flowsense error, you can reset the dryer to clear the message.

1. Unplug the Dryer:

Unplug the dryer from the power outlet and wait for 10 minutes.

2. Plug the Dryer Back In:

Reconnect the dryer to the power outlet and turn it on.

3. Start a New Drying Cycle:

Select a drying cycle and start the dryer. The Flowsense error message should now be gone.

Prevention Tips

To prevent Flowsense errors from recurring, follow these tips:

• Clean the lint filter after every drying cycle.
• Inspect the exhaust duct and hose regularly for any obstructions.
• Have the dryer vent professionally cleaned every 1-2 years.
• Avoid overloading the dryer.

Wrapping Up

If your LG dryer keeps saying Flowsense, don’t despair. By understanding the underlying causes and following the troubleshooting steps outlined above, you can resolve the issue and restore your dryer to its pristine working condition. Remember to prioritize safety and always disconnect the dryer from power before performing any maintenance or repairs.

Questions You May Have

Q1: What does the Flowsense error message mean?

A1: The Flowsense error message indicates that the dryer has detected a restriction in the airflow through the exhaust duct.

Q2: What should I do if my dryer vent is clogged?

A2: Use a vent cleaning brush to dislodge any debris from the vent. If the blockage is severe, you may need to call a professional dryer vent cleaning service.

Q3: How can I prevent Flowsense errors from happening in the future?

A3: Regularly clean the lint filter, inspect the exhaust duct and hose, and have the dryer vent professionally cleaned every 1-2 years.