Unraveling The Enigma: Why Your Bissell Vacuum Belt Persistently Detach

Vacuum cleaners are essential household appliances, and when they malfunction, it can be frustrating. One common issue with Bissell vacuums is a belt that keeps coming off. This can be a major inconvenience, but it’s usually a problem that you can fix yourself with a little troubleshooting.

Common Causes of a Bissell Vacuum Belt Coming Off

There are several reasons why a Bissell vacuum belt might come off, including:

• Worn or damaged belt: Over time, belts can become worn or damaged, which can cause them to slip off the pulleys.
• Loose belt tension: If the belt is not properly tensioned, it can slip off when the vacuum is in use.
• Misaligned pulleys: The pulleys that the belt runs on must be properly aligned, or the belt can come off.
• Clogged vacuum cleaner: If the vacuum cleaner is clogged with dirt or debris, it can put extra strain on the belt, causing it to come off.
• Damaged motor: In some cases, a damaged motor can cause the belt to come off.

How to Fix a Bissell Vacuum Belt That Keeps Coming Off

Depending on the cause, there are several steps you can take to fix a Bissell vacuum belt that keeps coming off:

1. Check the Belt

• Inspect the belt for any signs of wear or damage. If the belt is worn or damaged, it will need to be replaced.
• Make sure the belt is properly installed. The belt should be looped around the motor pulley and the brushroll pulley.

2. Adjust the Belt Tension

• If the belt is loose, you can adjust the tension by tightening the tension screw. The tension screw is usually located on the side of the vacuum cleaner.
• Turn the tension screw clockwise to tighten the belt. Do not overtighten the belt, as this can damage the belt or the vacuum cleaner.

3. Align the Pulleys

• If the pulleys are misaligned, you can adjust them by loosening the bolts that hold them in place.
• Once the bolts are loose, you can move the pulleys until they are aligned.
• Tighten the bolts to secure the pulleys in place.

4. Clean the Vacuum Cleaner

• If the vacuum cleaner is clogged, it can put extra strain on the belt, causing it to come off.
• Clean the vacuum cleaner by removing the dirt cup and emptying it.
• Also, clean the filter and any other parts of the vacuum cleaner that may be clogged.

5. Check the Motor

• If the motor is damaged, it can cause the belt to come off.
• To check the motor, unplug the vacuum cleaner and remove the belt.
• Try to turn the motor by hand. If the motor does not turn easily, it may be damaged and will need to be replaced.

6. Replace the Belt

• If the belt is worn or damaged, it will need to be replaced.
• To replace the belt, unplug the vacuum cleaner and remove the old belt.
• Install the new belt by looping it around the motor pulley and the brushroll pulley.
• Adjust the belt tension and align the pulleys as described above.

7. Call a Professional

• If you have tried all of the above steps and the belt still keeps coming off, you may need to call a professional.

Key Points

If your Bissell vacuum belt keeps coming off, there are several steps you can take to fix the problem. By following the steps outlined above, you can get your vacuum cleaner back up and running in no time.

Frequently Asked Questions

1. Why does my Bissell vacuum belt keep coming off when I vacuum?

• The belt may be worn or damaged.
• The belt tension may be too loose.
• The pulleys may be misaligned.
• The vacuum cleaner may be clogged.
• The motor may be damaged.

2. How do I know if my Bissell vacuum belt is worn out?

• The belt will be cracked or frayed.
• The belt will be stretched or loose.
• The belt will have visible wear or damage.

3. How often should I replace my Bissell vacuum belt?

• You should replace your Bissell vacuum belt every 6-12 months, or more often if you vacuum frequently.