Thermostat Woes: Why Does Your Honeywell Keep Saying Hold? Find Out Here!

Honeywell thermostats are renowned for their reliability and user-friendly features. However, occasional errors can occur, such as the thermostat displaying the word “Hold.” This can be frustrating and leave you wondering what has gone wrong. In this comprehensive blog post, we will delve into the reasons why your Honeywell thermostat may say “Hold” and provide step-by-step instructions on how to resolve the issue.

Understanding the “Hold” Mode

The “Hold” mode on a Honeywell thermostat is a temporary setting that overrides the programmed schedule and maintains a constant temperature. This mode is useful when you want to temporarily adjust the temperature without affecting your regular schedule. When the thermostat is in “Hold” mode, the display will show the word “Hold” and the current temperature.

Reasons Why Your Honeywell Thermostat Says “Hold”

There are several reasons why your Honeywell thermostat may display the “Hold” message:

1. Manual Hold: You may have accidentally pressed the “Hold” button on the thermostat. This will put the thermostat in “Hold” mode until you manually release it.
2. Temporary Hold: You may have set a temporary hold using the thermostat’s scheduling feature. This type of hold will automatically expire at the specified time.
3. Permanent Hold: You may have set a permanent hold using the thermostat’s advanced settings. This type of hold will remain in effect until you manually release it.
4. System Malfunction: In rare cases, a system malfunction can cause the thermostat to get stuck in “Hold” mode.

How to Release the “Hold” Mode

To release the “Hold” mode on your Honeywell thermostat, follow these steps:

1. Check the Thermostat Buttons: Ensure that you have not accidentally pressed the “Hold” button. If the button is not depressed, proceed to the next step.
2. Review the Thermostat Schedule: Check if you have set a temporary hold using the thermostat’s scheduling feature. If a hold is scheduled, you can cancel it by accessing the schedule menu and deleting the hold.
3. Check the Advanced Settings: If you have not set a temporary hold, you may need to check the thermostat’s advanced settings. Look for an option labeled “Permanent Hold” or “Continuous Hold.” If this option is enabled, disable it to release the “Hold” mode.
4. Restart the Thermostat: If none of the above steps resolve the issue, try restarting the thermostat. Turn off the power to the thermostat for a few minutes, then turn it back on.
5. Contact Honeywell Support: If you are still unable to release the “Hold” mode, contact Honeywell customer support for further assistance.

Troubleshooting Tips

Here are some additional troubleshooting tips that may help you resolve the “Hold” mode issue:

• Make sure that the thermostat is properly connected to the power supply.
• Check if the batteries in the thermostat are low or need replacing.
• Clean the thermostat’s sensors and display to ensure proper operation.
• Update the thermostat’s firmware to the latest version.

Preventing the “Hold” Mode from Recurring

To prevent the “Hold” mode from recurring, consider the following tips:

• Avoid accidentally pressing the “Hold” button by using the thermostat’s lock feature.
• Set temporary holds only when necessary and for a specific duration.
• Disable the permanent hold feature unless absolutely necessary.
• Regularly maintain the thermostat by cleaning the sensors and updating the firmware.

In a nutshell

Understanding why your Honeywell thermostat says “Hold” and how to resolve the issue is crucial for maintaining a comfortable indoor environment. By following the steps outlined in this guide, you can easily release the “Hold” mode and restore the thermostat to its normal operation. Remember to implement the troubleshooting tips and preventive measures to minimize the likelihood of this issue recurring.

Quick Answers to Your FAQs

1. Why does my Honeywell thermostat keep going into “Hold” mode?

• You may have accidentally pressed the “Hold” button or set a temporary or permanent hold using the thermostat’s scheduling or advanced settings features.

2. How do I know if my Honeywell thermostat is in “Hold” mode?

• The thermostat will display the word “Hold” on the screen.

3. Can I set a “Hold” mode for a specific duration?

• Yes, you can set a temporary hold using the thermostat’s scheduling feature.

4. How do I disable the “Permanent Hold” feature?

• Access the thermostat’s advanced settings and look for the option labeled “Permanent Hold” or “Continuous Hold.” Disable this option to release the “Hold” mode.

5. What should I do if I cannot release the “Hold” mode on my Honeywell thermostat?

• Restart the thermostat and check if the issue persists. If the problem remains, contact Honeywell customer support for further assistance.