Amana Dishwasher Demolition: A Step-By-Step Guide For The Handy Diyer

Are you facing a dishwasher malfunction and need to take it apart for repairs or maintenance? Look no further! This detailed guide will walk you through the process of disassembling an Amana dishwasher, providing clear instructions and helpful tips to ensure a successful outcome.

Tools and Materials Required:

Before you begin, gather the necessary tools and materials:

• Screwdriver (Phillips and flathead)
• Socket wrench (1/4 inch)
• Pliers
• Torx screwdriver (T15)
• Bucket or bowl
• Gloves
• Flashlight (optional)

Safety First!

Before starting any disassembly work, ensure your safety by:

• Unplugging the dishwasher from the power outlet.
• Turning off the water supply to the dishwasher.
• Wearing gloves to protect your hands.

Step 1: Remove the Front Panel

• Open the dishwasher door and locate the two screws holding the front panel in place.
• Remove the screws and gently pull the front panel forward to detach it.

Step 2: Disconnect the Electrical Connections

• Inside the dishwasher, disconnect the electrical wires connecting the door switch, water inlet valve, and other components.
• Use pliers or a flathead screwdriver to gently pry off the wire connectors.

Step 3: Remove the Control Panel

• Locate the screws securing the control panel to the dishwasher frame.
• Remove the screws and carefully lift the control panel up and out of the way.

Step 4: Detach the Spray Arms

• Locate the spray arms on the bottom and top racks of the dishwasher.
• Twist the spray arms counterclockwise to loosen them and remove them.

Step 5: Remove the Racks

• Pull the bottom rack straight out of the dishwasher.
• Lift the top rack and tilt it forward to remove it.

Step 6: Disconnect the Water Inlet and Drain Hoses

• At the back of the dishwasher, locate the water inlet and drain hoses.
• Use a socket wrench to loosen the hose clamps and disconnect the hoses.

Step 7: Remove the Door Assembly

• Open the dishwasher door fully.
• Locate the hinge screws on both sides of the door and remove them.
• Carefully lift the door assembly up and out of the dishwasher.

Step 8: Remove the Float Switch and Sump Assembly

• Locate the float switch and sump assembly at the bottom of the dishwasher.
• Disconnect the wires from the float switch and remove the sump assembly.

Step 9: Remove the Motor and Pump Assembly

• Locate the motor and pump assembly at the bottom of the dishwasher.
• Disconnect the wires from the motor and pump.
• Remove the bolts securing the assembly to the frame and lift it out.

Step 10: Remove the Water Distribution Tube

• Locate the water distribution tube running along the back of the dishwasher.
• Disconnect the tube from the water inlet valve and remove it.

Step 11: Remove the Drain Pump Motor

• Locate the drain pump motor at the bottom of the dishwasher.
• Disconnect the wires from the motor and remove the bolts securing it to the frame.

Your Dishwasher is Now Disassembled!

Congratulations, you have successfully taken apart your Amana dishwasher. Now you can access the internal components for repairs or maintenance. Remember to follow the steps in reverse order to reassemble your dishwasher.

Basics You Wanted To Know

1. How do I reset my Amana dishwasher?

• Unplug the dishwasher for 30 seconds and then plug it back in.
• Press the “Start/Cancel” button for 5 seconds.

2. Why is my Amana dishwasher leaking water?

• Check the door gasket for tears or damage.
• Inspect the water inlet valve for leaks.
• Check the drain hose for clogs or damage.

3. How do I replace the heating element in my Amana dishwasher?

• Disconnect the power to the dishwasher.
• Remove the front panel and locate the heating element.
• Disconnect the wires from the heating element and remove it.
• Install the new heating element and reconnect the wires.