Dishwashing Dilemma: A Step-By-Step Guide To Starting A Whirlpool Dishwasher Without A Start Button

Whirlpool dishwashers are known for their reliability and efficiency. However, if you find yourself in a situation where the start button on your Whirlpool dishwasher is unresponsive, don’t panic! There are still ways to start the washing cycle without the start button. This blog post will guide you through the various methods to resolve this issue and get your dishes sparkling clean.

Troubleshooting the Start Button

Before attempting to start the dishwasher without the start button, it’s important to troubleshoot the button itself. Here are a few things to check:

• Power Supply: Ensure that the dishwasher is plugged into a power outlet and that the power is turned on.
• Door Switch: Check if the dishwasher door is properly closed. If the door switch is faulty, the dishwasher will not start.
• Control Panel: Inspect the control panel for any visible damage or loose connections.

Methods to Start Whirlpool Dishwasher Without Start Button

If troubleshooting the start button does not resolve the issue, you can try the following methods to start the dishwasher:

1. Power Reset

• Unplug the dishwasher from the power outlet.
• Wait for 30 seconds and plug it back in.
• This will reset the dishwasher’s control panel and may resolve the issue.

2. Use the Hidden Start Button

• Some Whirlpool dishwashers have a hidden start button located on the bottom of the door.
• Open the dishwasher door and look for a small button near the hinge.
• Press and hold the button for a few seconds to start the dishwasher.

3. Initiate a Diagnostic Cycle

• Close the dishwasher door.
• Press and hold the “Cancel/Drain” button for 5 seconds.
• The dishwasher will enter a diagnostic cycle, which will automatically start the washing cycle.

4. Use a Remote Start Device

• If your Whirlpool dishwasher is Wi-Fi enabled, you can use a remote start device to start the dishwasher from your smartphone or tablet.
• Install the manufacturer’s app and follow the instructions to connect your dishwasher and start the cycle remotely.

5. Replace the Start Button

• If none of the above methods work, you may need to replace the start button.
• Contact a qualified appliance repair technician to diagnose and replace the faulty button.

6. Check the Child Lock Feature

• Some Whirlpool dishwashers have a child lock feature that prevents the dishwasher from starting accidentally.
• Ensure that the child lock feature is disabled before attempting to start the dishwasher.

7. Contact Customer Support

• If you are unable to resolve the issue using the methods described above, contact Whirlpool customer support for further assistance.

Wrapping Up: Your Dishwasher’s Back in Action

By following the troubleshooting and starting methods outlined in this blog post, you should be able to start your Whirlpool dishwasher without the start button. Remember to check the power supply, door switch, and control panel before attempting any of the alternative methods. If the issue persists, do not hesitate to contact a qualified appliance repair technician or Whirlpool customer support for assistance.

Frequently Asked Questions

Q: Why is my Whirlpool dishwasher not starting, even when I press the start button?
A: There could be several reasons, including a faulty start button, power supply issues, or a door switch malfunction.

Q: Can I use a magnet to start my Whirlpool dishwasher?
A: No, using a magnet to start a Whirlpool dishwasher is not recommended. It may damage the dishwasher’s electronics.

Q: How do I reset my Whirlpool dishwasher without the start button?
A: Unplug the dishwasher from the power outlet for 30 seconds and then plug it back in. This will reset the dishwasher’s control panel.