Makita Drill Care: A Step-By-Step Guide To Troubleshooting And Maintenance

Whether you’re a seasoned professional or a weekend warrior, your Makita drill is an indispensable tool in your arsenal. But even the most reliable tools need a little TLC from time to time. In this comprehensive guide, we’ll walk you through the essential steps of servicing your Makita drill, ensuring it performs at its peak for years to come.

Essential Tools and Materials

Before you start, gather the following tools and materials:

• Safety glasses
• Screwdriver set
• Torx bit set
• Hex key set
• Clean rags
• Lubricating oil
• Grease

Step 1: Safety First

Always unplug the drill from the power source and wear safety glasses before performing any servicing tasks.

Step 2: Disassemble the Housing

Using a screwdriver, remove the screws that hold the housing together. Carefully pry the housing apart, exposing the internal components.

Step 3: Inspect the Brushes

Check the carbon brushes for wear or damage. If they are worn down to less than 1/4 inch, they need to be replaced.

Step 4: Clean the Commutator

Use a clean rag to gently clean the commutator, removing any carbon dust or debris.

Step 5: Lubricate the Bearings

Apply a small amount of lubricating oil to the bearings. This will reduce friction and extend their lifespan.

Step 6: Reassemble the Housing

Once the components are cleaned and lubricated, reassemble the housing in reverse order. Tighten the screws securely.

Step 7: Inspect the Chuck

Check the chuck for proper operation. If it is loose or does not grip the drill bit securely, it may need to be replaced.

Step 8: Clean the Exterior

Use a clean rag to wipe down the exterior of the drill, removing any dirt or debris.

Step 9: Grease the Gears

If your drill has exposed gears, apply a small amount of grease to them. This will reduce noise and wear.

Step 10: Test the Drill

Plug the drill back into the power source and test it out. If it operates smoothly and efficiently, you have successfully serviced your Makita drill.

Troubleshooting Tips

• If the drill is not running at full speed, check the brushes and commutator.
• If the drill is making a grinding noise, the bearings may be worn.
• If the chuck is not gripping the drill bit securely, it may need to be replaced.

How to Extend the Life of Your Makita Drill

• Store the drill in a dry, clean place.
• Clean the exterior of the drill regularly.
• Lubricate the bearings and gears periodically.
• Have the drill serviced by a qualified technician every few years.

What People Want to Know

1. How often should I service my Makita drill?

• It depends on the frequency of use, but it is recommended to service your drill every 6-12 months.

2. Can I replace the brushes myself?

• Yes, replacing the brushes is a relatively simple task. However, it is important to follow the manufacturer’s instructions carefully.

3. What type of lubricating oil should I use?

• Use a light-weight, non-detergent oil specifically designed for electric tools.

4. How do I know if the bearings need to be replaced?

• If the drill is making a grinding noise or if the bearings feel rough when rotated, they may need to be replaced.

5. Can I service my Makita drill if it is still under warranty?

• Servicing your drill yourself may void the warranty. It is recommended to contact the manufacturer or an authorized service center for repairs while the drill is under warranty.