Beat The Washer Blues: The Ultimate Guide To Resetting Samsung Error Code Ur

If your Samsung washer displays the UR code, indicating an unbalanced load, it’s essential to reset the machine to restore its functionality. This blog post will provide a comprehensive guide on how to reset Samsung washer UR code and troubleshoot the underlying issue.

Understanding the UR Code

The UR code is triggered when the washer detects an unbalanced load during the spin cycle. This imbalance can cause excessive vibrations and noise, potentially damaging the machine. To prevent further issues, the washer stops the cycle and displays the UR code.

Resetting the Samsung Washer UR Code

Method 1: Power Reset

1. Unplug the washer from the power outlet.
2. Wait for 5 minutes to allow the machine to fully discharge.
3. Plug the washer back into the outlet.
4. Press the “Power” button to turn on the washer.

Method 2: Manual Reset

1. Open the washer door.
2. Locate the “Spin Speed” knob.
3. Turn the knob to the “No Spin” setting.
4. Press and hold the “Start/Pause” button for 3 seconds.
5. The washer will start the drain cycle.

Method 3: Diagnostic Mode Reset

1. Unplug the washer from the power outlet.
2. Press and hold the “Temperature” and “Spin Speed” buttons simultaneously.
3. While holding the buttons, plug the washer back into the outlet.
4. Release the buttons when the washer starts beeping.
5. Press the “Start/Pause” button to enter diagnostic mode.
6. Use the “Spin Speed” knob to select the “UR Reset” option.
7. Press the “Start/Pause” button to initiate the reset.

Troubleshooting the Unbalanced Load Issue

After resetting the washer, it’s important to identify and resolve the underlying cause of the unbalanced load. Here are some common troubleshooting tips:

• Distribute Clothes Evenly: Ensure that the clothes are evenly distributed throughout the drum. Avoid overloading the washer.
• Use Fabric Softener: Adding a fabric softener to the wash cycle can help reduce static and prevent clothes from clumping together.
• Check for Foreign Objects: Inspect the drum for any foreign objects, such as loose coins or buttons, that may have caused the imbalance.
• Level the Washer: Ensure that the washer is level on all sides. Uneven ground can lead to vibrations and imbalance.

Other Error Codes Related to UR Code

In some cases, the UR code may be accompanied by other error codes, such as:

• UE: Unstable load
• UC: Oversudsing
• UB: Water imbalance

Troubleshooting these error codes involves similar steps to resetting the UR code.

Wrapping Up: Restoring Washer Functionality

By following the steps outlined in this guide, you can effectively reset Samsung washer UR code and resolve the unbalanced load issue. Remember to troubleshoot the underlying cause to prevent future occurrences. If you encounter any difficulties or the issue persists, consult a qualified appliance repair technician.

Answers to Your Most Common Questions

Q: Why does my Samsung washer display the UR code?
A: The UR code indicates an unbalanced load during the spin cycle.

Q: How long should I wait before plugging the washer back in after unplugging it?
A: Wait for 5 minutes to allow the machine to fully discharge.

Q: What does the “No Spin” setting do?
A: The “No Spin” setting prevents the washer from spinning the clothes, which helps to redistribute the load and resolve the imbalance.

Q: How do I enter diagnostic mode?
A: Press and hold the “Temperature” and “Spin Speed” buttons while plugging the washer back into the outlet.

Q: What is the “UR Reset” option in diagnostic mode?
A: The “UR Reset” option resets the washer’s settings related to the unbalanced load detection.