Unleash Your Lg Dryer’S Heat: A Step-By-Step Guide To Resetting The Heating Element

A malfunctioning heating element can leave your clothes damp and prolong drying time. If you’re facing this issue with your LG dryer, resetting the heating element can often solve the problem. Here’s a step-by-step guide to help you reset your LG dryer heating element:

Safety Precautions

Before you begin, ensure the dryer is unplugged from the power outlet and has cooled down completely.

Identifying the Heating Element

1. Open the dryer door and locate the rear panel.
2. Unscrew the screws holding the panel in place and carefully remove it.
3. The heating element is usually a large, coil-shaped component located at the back of the dryer drum.

Resetting the Heating Element

1. Locate the two wires connected to the heating element.
2. Disconnect the wires from the element one at a time.
3. Wait for a few minutes to allow the element to cool down further.
4. Reconnect the wires to the heating element, ensuring they are securely fastened.

Testing the Heating Element

1. Plug the dryer back into the power outlet.
2. Start a short drying cycle using the highest heat setting.
3. Check if the heating element is heating up by touching it with a heat-resistant glove. It should become warm to the touch.

Troubleshooting Common Issues

If the heating element is not heating up after resetting, there may be other issues:

• Faulty heating element: The heating element may be damaged and need to be replaced.
• Broken wire: Inspect the wires connecting the heating element for any damage or breaks.
• Thermal fuse: The thermal fuse is a safety device that trips when the heating element overheats. If it has tripped, it will need to be replaced.

Reassembling the Dryer

1. Once the heating element is reset or replaced, reassemble the dryer in reverse order.
2. Ensure that all screws are tightened securely.
3. Plug the dryer back into the power outlet and test it by running a short drying cycle.

Additional Tips

• If you are not comfortable performing these steps yourself, contact a qualified appliance repair technician.
• Clean the lint filter regularly to prevent overheating and damage to the heating element.
• Use the correct dryer settings for the type of fabrics you are drying.
• Avoid overloading the dryer, as this can strain the heating element.

Wrap-Up: Reviving Your LG Dryer

By following these steps, you can effectively reset your LG dryer heating element and restore it to proper working order. Remember to prioritize safety and consult a professional if you encounter any difficulties. With a functioning heating element, your LG dryer will efficiently dry your clothes, leaving them fresh and ready to wear.

Popular Questions

Q1: How long should I wait before reconnecting the wires to the heating element?

A1: Wait for at least 5 minutes to allow the element to cool down completely.

Q2: What type of wire should I use to connect the heating element?

A2: Use high-temperature wire designed for use with appliances.

Q3: How do I know if the thermal fuse has tripped?

A3: The thermal fuse is usually located near the heating element. If it has tripped, it will appear blown or melted.