How To Reset Your Lg Dryer Flow Sense: A Step-By-Step Guide To Restore Optimal Performance
What To Know
- In this comprehensive guide, we’ll walk you through the simple steps on how to reset LG dryer Flow Sense, helping you get your dryer back in top shape.
- The sensor detects the airflow through the dryer, while the damper adjusts the airflow to optimize drying performance.
- If the sensor becomes blocked or the damper fails, it can affect the dryer’s ability to dry clothes properly.
If your LG dryer isn’t drying clothes as efficiently as it used to, you may need to reset the Flow Sense system. This system monitors airflow through the dryer and can become blocked or clogged over time, leading to reduced drying performance. In this comprehensive guide, we’ll walk you through the simple steps on how to reset LG dryer Flow Sense, helping you get your dryer back in top shape.
Understanding the Flow Sense System
The Flow Sense system in LG dryers consists of two main components: a sensor and a damper. The sensor detects the airflow through the dryer, while the damper adjusts the airflow to optimize drying performance. If the sensor becomes blocked or the damper fails, it can affect the dryer’s ability to dry clothes properly.
Indicators of a Flow Sense Issue
There are several signs that may indicate a problem with the Flow Sense system in your LG dryer:
- Extended drying times: If your clothes are taking significantly longer to dry than usual, it could be a sign of reduced airflow.
- Wrinkled or damp clothes: If your clothes come out of the dryer wrinkled or still damp, it suggests that the dryer isn’t drying them effectively.
- Error code: Some LG dryers may display an error code, such as “FE” or “FL,” indicating a Flow Sense issue.
How to Reset LG Dryer Flow Sense
Materials you’ll need:
- A soft cloth
- A vacuum cleaner
Step-by-Step Instructions:
1. Unplug the dryer: For safety, always unplug the dryer before performing any maintenance.
2. Locate the Flow Sense sensor: The sensor is usually located near the bottom of the dryer, behind the lint filter. It’s a small, round component with a wire attached to it.
3. Clean the sensor: Gently wipe away any dust or debris from the sensor using a soft cloth. If necessary, you can use a vacuum cleaner to remove any stubborn particles.
4. Inspect the damper: The damper is located behind the sensor. Check if it’s moving freely and isn’t obstructed by any objects. If the damper is stuck, you may need to gently move it back and forth to loosen it up.
5. Reset the Flow Sense: Once the sensor and damper are clean and free of obstructions, press and hold the “Start” button on the dryer for 5 seconds. You should hear a beep, indicating that the Flow Sense has been reset.
Additional Troubleshooting Tips
- Check the lint filter: A clogged lint filter can restrict airflow, so make sure to clean it regularly.
- Inspect the exhaust vent: The exhaust vent should be clear of any blockages, such as lint or debris.
- Clean the dryer drum: Over time, lint and other particles can accumulate inside the dryer drum, reducing airflow. Use a damp cloth to wipe down the inside of the drum.
- Contact LG support: If you’ve tried the above steps and the Flow Sense issue persists, contact LG support for further assistance.
Troubleshooting LG Dryer Flow Sense Not Resetting
If you’re unable to reset the Flow Sense system, there may be an underlying issue. Here are some possible causes:
- Faulty sensor: The Flow Sense sensor may be defective and need to be replaced.
- Damaged damper: The damper may be stuck or damaged, preventing it from adjusting the airflow properly.
- Electrical issue: There may be an electrical fault that’s preventing the Flow Sense system from functioning correctly.
In such cases, it’s recommended to contact a qualified appliance repair technician for further diagnosis and repair.
What You Need to Learn
Q: How often should I reset the Flow Sense system?
A: It’s generally not necessary to reset the Flow Sense system regularly. However, if you experience any issues with the dryer’s drying performance, you can try resetting the system as a troubleshooting step.
Q: Can I use a vacuum cleaner to clean the Flow Sense sensor?
A: Yes, you can use a vacuum cleaner to remove any stubborn particles from the Flow Sense sensor. However, be careful not to damage the sensor or the wire attached to it.
Q: What happens if the Flow Sense system is not working properly?
A: A malfunctioning Flow Sense system can lead to reduced drying performance, extended drying times, and wrinkled or damp clothes. It’s important to reset or troubleshoot the system if you suspect any issues.
