Reset Your Kitchenaid Dishwasher Clean Light In 3 Simple Steps

If your KitchenAid dishwasher‘s clean light is flashing, it’s a sign that the dishwasher needs to be cleaned. The clean light is designed to remind you to clean the dishwasher every 30 to 60 washes. If you ignore the light, the dishwasher will eventually stop working.

Causes of a Flashing Clean Light

There are several reasons why your KitchenAid dishwasher‘s clean light may be flashing. The most common causes include:

• Dirty dishwasher: The most common cause of a flashing clean light is a dirty dishwasher. Food particles, grease, and detergent buildup can accumulate on the dishwasher’s interior, which can trigger the clean light.
• Clogged filter: The dishwasher’s filter is designed to trap food particles and other debris. If the filter becomes clogged, it can restrict water flow and cause the clean light to flash.
• Faulty sensor: In some cases, a flashing clean light can be caused by a faulty sensor. The sensor is responsible for detecting when the dishwasher is clean. If the sensor is faulty, it may not be able to detect when the dishwasher is clean, which can cause the clean light to flash.

Resetting the Clean Light

If your KitchenAid dishwasher‘s clean light is flashing, you can reset it by following these steps:

1. Press the “Cancel” button. The “Cancel” button is located on the dishwasher’s control panel.
2. Hold the “Cancel” button for 5 seconds. The dishwasher will beep twice and the clean light will turn off.
3. Press the “Start” button. The dishwasher will start to fill with water.
4. Add dishwasher detergent to the dispenser.
5. Close the dishwasher door.
6. Press the “Start” button again. The dishwasher will start to wash the dishes.

Cleaning the Dishwasher

Once you have reset the clean light, you should clean the dishwasher. To clean the dishwasher, follow these steps:

1. Remove the dishes from the dishwasher.
2. Remove the filter from the dishwasher. The filter is located at the bottom of the dishwasher.
3. Clean the filter with hot water and a sponge.
4. Replace the filter in the dishwasher.
5. Add dishwasher detergent to the dispenser.
6. Close the dishwasher door.
7. Press the “Start” button. The dishwasher will start to fill with water.
8. Let the dishwasher run through a complete cycle.

Preventing the Clean Light from Flashing

There are several things you can do to prevent your KitchenAid dishwasher‘s clean light from flashing. These include:

• Clean the dishwasher regularly. The best way to prevent the clean light from flashing is to clean the dishwasher regularly. You should clean the dishwasher every 30 to 60 washes.
• Use a dishwasher cleaner. Dishwasher cleaners are designed to remove food particles, grease, and detergent buildup from the dishwasher’s interior. You should use a dishwasher cleaner once a month.
• Clean the filter regularly. The dishwasher’s filter should be cleaned every month. To clean the filter, remove it from the dishwasher and clean it with hot water and a sponge.
• Use the correct amount of dishwasher detergent. Using too much dishwasher detergent can cause food particles and grease to stick to the dishes and the dishwasher’s interior. You should only use the amount of dishwasher detergent recommended by the manufacturer.

Troubleshooting

If you have followed the steps above and the clean light is still flashing, there may be a problem with the dishwasher. You can try the following troubleshooting tips:

• Check the water supply. Make sure that the dishwasher is connected to a water supply and that the water supply is turned on.
• Check the drain hose. Make sure that the drain hose is not kinked or clogged.
• Check the electrical connection. Make sure that the dishwasher is plugged into an electrical outlet and that the outlet is turned on.
• Reset the dishwasher. You can reset the dishwasher by following the steps in the “Resetting the Clean Light” section above.

Takeaways: Maintaining a Clean and Efficient Dishwasher

By following the tips in this guide, you can reset your KitchenAid dishwasher‘s clean light and keep your dishwasher running smoothly. A clean dishwasher will help you to get your dishes clean and sanitized, and it will also help to extend the life of your dishwasher.

Popular Questions

Q: Why is my KitchenAid dishwasher‘s clean light flashing?
A: There are several reasons why your KitchenAid dishwasher‘s clean light may be flashing. The most common causes include a dirty dishwasher, a clogged filter, or a faulty sensor.

Q: How do I reset the clean light on my KitchenAid dishwasher?
A: To reset the clean light on your KitchenAid dishwasher, press the “Cancel” button for 5 seconds. The dishwasher will beep twice and the clean light will turn off.

Q: How often should I clean my KitchenAid dishwasher?
A: You should clean your KitchenAid dishwasher every 30 to 60 washes. You can use a dishwasher cleaner to remove food particles, grease, and detergent buildup from the dishwasher’s interior.