Diy Masterclass: Resetting Your Kenmore Dishwasher Control Board In 5 Simple Steps
What To Know
- It receives input from the user interface, such as the cycle selection and start button, and sends commands to the various components of the dishwasher, such as the water pump, heating element, and detergent dispenser.
- If the above methods do not resolve the issue, you may need to reset the circuit breaker that supplies power to the dishwasher.
- If you have tried all of the above troubleshooting steps and your Kenmore dishwasher is still not functioning properly, it may be time to call a professional appliance repair technician.
A malfunctioning dishwasher can be a major inconvenience, especially when you have a house full of dirty dishes. If your Kenmore dishwasher is acting up, it may be time to reset the control board. Resetting the control board can often resolve common issues such as error codes, unresponsive buttons, or incorrect cycles.
Understanding the Control Board
The control board is the brain of your dishwasher. It receives input from the user interface, such as the cycle selection and start button, and sends commands to the various components of the dishwasher, such as the water pump, heating element, and detergent dispenser.
Signs Your Control Board Needs Resetting
There are several signs that may indicate a need to reset your Kenmore dishwasher control board:
- Error codes displayed on the control panel
- Unresponsive buttons or dials
- Dishwasher not starting or completing cycles
- Incorrect water temperature or detergent dispensing
- Strange noises or leaks
Safety Precautions
Before resetting the control board, ensure you take the following safety precautions:
- Unplug the dishwasher from the electrical outlet.
- Turn off the water supply to the dishwasher.
Step-by-Step Resetting Instructions
Method 1: Power Cycle Reset
1. Unplug the dishwasher from the electrical outlet.
2. Wait 30 seconds to allow the control board to discharge any residual power.
3. Plug the dishwasher back into the outlet.
4. Turn on the water supply.
5. Start the dishwasher to check if the issue has been resolved.
Method 2: Manual Reset Button
Some Kenmore dishwasher models have a manual reset button located on the control panel or inside the dishwasher door. If your model has this button, follow these steps:
1. Open the dishwasher door.
2. Locate the reset button. It may be labeled “Reset” or have a small arrow symbol.
3. Press and hold the reset button for 3-5 seconds.
4. Close the dishwasher door.
5. Start the dishwasher to check if the issue has been resolved.
Method 3: Circuit Breaker Reset
If the above methods do not resolve the issue, you may need to reset the circuit breaker that supplies power to the dishwasher.
1. Locate the electrical panel for your home.
2. Find the circuit breaker labeled “Dishwasher” or “Kitchen.”
3. Flip the circuit breaker to the “Off” position and then back to the “On” position.
4. Start the dishwasher to check if the issue has been resolved.
Additional Troubleshooting Tips
If resetting the control board does not solve your dishwasher issue, try the following additional troubleshooting tips:
- Check for clogged filters or hoses.
- Clean the door gasket to ensure a proper seal.
- Inspect the float switch for any debris or damage.
- Test the water temperature by running hot water from a nearby faucet.
When to Call a Professional
If you have tried all of the above troubleshooting steps and your Kenmore dishwasher is still not functioning properly, it may be time to call a professional appliance repair technician.
Resetting Success: Enjoying a Clean and Efficient Dishwasher
Resetting the control board of your Kenmore dishwasher can be a simple and effective way to resolve common issues. By following the steps outlined in this guide, you can get your dishwasher back up and running in no time. Remember, if you encounter any difficulties or the issue persists, do not hesitate to consult a qualified appliance repair technician.
Popular Questions
Q: How often should I reset my Kenmore dishwasher control board?
A: Resetting the control board is not a regular maintenance task. It is only necessary if you experience issues with the dishwasher’s functionality.
Q: Can I reset the control board if my dishwasher is leaking?
A: No, if your dishwasher is leaking, you should not attempt to reset the control board. Contact a professional appliance repair technician to diagnose and fix the leak.
Q: What other factors can affect the performance of my Kenmore dishwasher?
A: Factors such as water hardness, detergent quality, and regular cleaning and maintenance can all impact the performance of your dishwasher.