Unveil The Mystery: How To Reset Bosch Dishwasher E19 Error Effortlessly
What To Know
- When the system malfunctions, the dishwasher may display the E19 error and refuse to operate.
- If it malfunctions, it may not be able to accurately detect the water level, leading to the E19 error.
- Check the water pressure to ensure it is within the recommended range for the dishwasher.
If you’re facing the dreaded “E19” error on your Bosch dishwasher, don’t despair! This guide will provide you with comprehensive instructions on how to reset the appliance and resolve the issue.
Understanding the E19 Error
The E19 error code indicates a problem with the dishwasher’s overflow protection system. This system is designed to prevent water damage by detecting and stopping excess water accumulation. When the system malfunctions, the dishwasher may display the E19 error and refuse to operate.
Resetting the Bosch Dishwasher E19 Error
1. Safety First
Before attempting any reset procedure, ensure that the dishwasher is disconnected from the power source and water supply.
2. Manual Reset
Option 1:
- Press and hold the “Start/Reset” button for 3 seconds.
- Release the button and press it again for 3 more seconds.
- The dishwasher will beep and reset.
Option 2:
- Turn off the circuit breaker or fuse for the dishwasher.
- Wait 30 seconds and turn the power back on.
- The dishwasher will reset automatically.
3. Factory Reset
If the manual reset methods fail, you can perform a factory reset:
- Press and hold the “Start/Reset” and “Delay Start” buttons simultaneously for 5 seconds.
- The dishwasher will beep and display “CLr.”
- Release the buttons and the dishwasher will reset to its factory settings.
Troubleshooting Common Causes of E19 Error
1. Overflow Sensor
Inspect the overflow sensor located at the bottom of the dishwasher. Clean any debris or obstructions that may be interfering with its operation.
2. Drain Pump
Check the drain pump for any blockages or damage. Remove any debris and ensure that the pump is functioning properly.
3. Water Inlet Valve
The water inlet valve controls the flow of water into the dishwasher. If it malfunctions, it can cause excessive water accumulation and trigger the E19 error. Inspect the valve for leaks or blockages.
4. Float Switch
The float switch detects the water level in the dishwasher. If it malfunctions, it may not be able to accurately detect the water level, leading to the E19 error. Check the float switch for any damage or debris.
Additional Tips
- If the reset procedures do not resolve the issue, contact a qualified appliance repair technician.
- Regularly clean the dishwasher to prevent debris buildup that can cause malfunctions.
- Use the correct amount of dishwashing detergent as excessive suds can trigger the overflow protection system.
- Check the water pressure to ensure it is within the recommended range for the dishwasher.
Wrapping Up: Troubleshooting Your Bosch Dishwasher E19 Error
By following these instructions, you can successfully reset your Bosch dishwasher and resolve the E19 error. Remember to address any underlying issues that may have caused the error to prevent future occurrences. If you encounter any difficulties or the issue persists, do not hesitate to seek professional assistance.
Answers to Your Most Common Questions
Q: What does the E19 error code on a Bosch dishwasher mean?
A: It indicates a problem with the dishwasher’s overflow protection system.
Q: How long should I wait after a power outage before resetting my dishwasher?
A: Wait at least 30 seconds to allow the dishwasher’s electronic components to reset.
Q: Can I reset my dishwasher using the control panel?
A: Yes, you can press and hold the “Start/Reset” button for 3 seconds to initiate a manual reset.
Q: How often should I clean my dishwasher to prevent the E19 error?
A: Regular cleaning is recommended to remove debris and prevent malfunctions.
Q: What is the recommended water pressure range for a Bosch dishwasher?
A: The recommended water pressure range is between 20 and 120 psi.