Unveil The Secret: How To Reset Your Asko Dishwasher F10 In A Snap

Are you facing the dreaded F10 error code on your Asko dishwasher? Don’t panic! Resetting your dishwasher can often resolve this issue and get your dishes sparkling clean again. In this comprehensive guide, we’ll provide you with step-by-step instructions on how to reset your Asko dishwasher F10.

Step 1: Identify the F10 Error Code

The F10 error code on Asko dishwashers typically indicates a problem with the water supply. Ensure that the water supply is turned on and that there are no kinks or leaks in the hose.

Step 2: Check the Drain Hose

Next, inspect the drain hose for any blockages. Disconnect the hose from the dishwasher and check for any debris or buildup. If necessary, clean the hose with a drain snake or a mixture of baking soda and vinegar.

Step 3: Reset the Dishwasher Manually

Method 1: Power Cycle

1. Turn off the dishwasher at the power source.
2. Wait for 30 seconds.
3. Turn the dishwasher back on.

Method 2: Use the Reset Button

Some Asko dishwashers have a dedicated reset button. If your dishwasher has one, locate it and press and hold it for 3-5 seconds until the dishwasher beeps or the lights flash.

Step 4: Reset the Dishwasher Using the Control Panel

1. Open the dishwasher door.
2. Press and hold the “Start” button for 3-5 seconds.
3. Release the button and close the door.

Step 5: Perform a Test Cycle

After resetting the dishwasher, run a test cycle with a small amount of dishes. This will help ensure that the dishwasher is functioning properly.

Step 6: Additional Troubleshooting Tips

If the F10 error code persists, here are some additional troubleshooting tips:

• Check the water pressure: Ensure that the water pressure to the dishwasher is at least 20 psi.
• Inspect the inlet valve: The inlet valve controls the flow of water into the dishwasher. If it’s faulty, it can cause the F10 error.
• Examine the water heater: If your water heater is not working properly, it can affect the dishwasher’s water supply.
• Contact Asko support: If you’ve tried all the troubleshooting steps and the F10 error code is still present, contact Asko customer support for assistance.

The Last Dish

Resetting an Asko dishwasher F10 is a straightforward process that can often resolve the issue and restore your dishwasher to its optimal performance. By following the steps outlined in this guide, you can get your dishes sparkling clean again in no time.

What You Need to Know

Q: Why does my Asko dishwasher display the F10 error code?
A: The F10 error code typically indicates a problem with the water supply. Check the water supply, drain hose, and inlet valve for any issues.

Q: How do I reset my Asko dishwasher without a reset button?
A: You can reset your Asko dishwasher manually by power cycling it or using the control panel.

Q: What if the F10 error code persists after resetting the dishwasher?
A: If the error code persists, check the water pressure, inspect the inlet valve and water heater, or contact Asko customer support for assistance.