Fix Your Washing Woes: Step-By-Step Guide To Whirlpool Washer Control Board Replacement
What To Know
- Replacing the control board is a relatively straightforward task that can be completed in a few hours with the right tools and materials.
- Replacing a Whirlpool washer control board is a relatively simple task that can be completed in a few hours.
- The cost of a Whirlpool washer control board varies depending on the model.
When your Whirlpool washer starts malfunctioning, it can be a frustrating experience. One of the most common causes of washer problems is a faulty control board. Replacing the control board is a relatively straightforward task that can be completed in a few hours with the right tools and materials. In this comprehensive guide, we will walk you through the step-by-step process of how to replace a Whirlpool washer control board.
Gather Tools and Materials
Before you begin, gather the following tools and materials:
- New Whirlpool washer control board
- Screwdriver (Phillips and flathead)
- Socket wrench
- Multimeter (optional)
- Wire connectors (optional)
Safety First
Before starting any electrical work, unplug the washer from the power outlet. Turn off the water supply to the washer and disconnect the hoses.
Remove the Washer Top Panel
1. Locate the two screws on the back of the washer top panel.
2. Remove the screws and lift the top panel off the washer.
Disconnect the Control Board
1. Locate the control board, which is biasanya located on the front of the washer.
2. Disconnect all the wires connected to the control board.
3. Remove the screws holding the control board in place.
Test the Control Board (Optional)
If you have a multimeter, you can test the control board to confirm that it is faulty. However, this step is optional and not necessary to replace the control board.
Install the New Control Board
1. Position the new control board in place and secure it with the screws.
2. Reconnect all the wires to the control board.
3. Make sure all the connections are tight and secure.
Reassemble the Washer
1. Place the top panel back on the washer and secure it with the screws.
2. Reconnect the water hoses and turn on the water supply.
3. Plug the washer back into the power outlet.
Test the Washer
1. Turn on the washer and select a cycle.
2. Observe the washer to make sure it is functioning properly.
Troubleshooting
If the washer is still not working after replacing the control board, there may be another underlying issue. Here are some common troubleshooting tips:
- Check the wiring connections to make sure they are secure.
- Use a multimeter to test the power supply to the washer.
- Inspect the door switch and lid switch to make sure they are functioning properly.
Final Words
Replacing a Whirlpool washer control board is a relatively simple task that can be completed in a few hours. By following the steps outlined in this guide, you can save money on repair costs and get your washer back up and running in no time.
Frequently Asked Questions
Q: How do I know if my Whirlpool washer control board is faulty?
A: Common symptoms of a faulty control board include the washer not turning on, not responding to buttons, or displaying error codes.
Q: Can I repair a Whirlpool washer control board?
A: Repairing a control board is not recommended as it requires specialized knowledge and equipment. It is best to replace the control board with a new one.
Q: How much does it cost to replace a Whirlpool washer control board?
A: The cost of a Whirlpool washer control board varies depending on the model. However, you can expect to pay between $100 and $200 for a new control board.