Unlock The Secrets: How To Replace A Whirlpool Dryer Control Board In A Flash!
What To Know
- Using a Phillips screwdriver, remove the screws securing the top panel at the back of the dryer.
- The control board is typically located on the front or back of the dryer, inside the control panel.
- Can I replace the control board myself, or do I need a professional.
Experiencing unexpected behavior or malfunctions with your Whirlpool dryer? The control board, the brain of your dryer, might be the culprit. Replacing it can restore your dryer’s operation. This comprehensive guide will walk you through the steps on how to replace a Whirlpool dryer control board efficiently and safely.
Tools and Materials
- Phillips screwdriver
- Flathead screwdriver
- New Whirlpool dryer control board
- Safety glasses
- Gloves (optional)
Safety Precautions
- Unplug the dryer from the electrical outlet.
- Allow the dryer to cool down completely.
- Wear safety glasses to protect your eyes from debris.
Step-by-Step Guide to Replacing the Control Board
1. Remove the Top Panel
Using a Phillips screwdriver, remove the screws securing the top panel at the back of the dryer. Carefully lift the top panel and set it aside.
2. Locate the Control Board
The control board is typically located on the front or back of the dryer, inside the control panel. It’s a rectangular-shaped circuit board with wires and connectors attached.
3. Disconnect the Wires and Connectors
Carefully disconnect all the wires and connectors from the control board. Use a flathead screwdriver to gently pry off any connectors. Take note of the wire and connector positions for reassembly.
4. Remove the Control Board
Once all the wires and connectors are disconnected, remove the screws holding the control board in place. Carefully pull the control board out of its housing.
5. Install the New Control Board
Align the new control board with the housing and insert it. Secure it with the screws.
6. Reconnect the Wires and Connectors
Connect the wires and connectors to the new control board in the same positions as before. Ensure all connections are secure.
7. Reinstall the Top Panel
Place the top panel back onto the dryer and secure it with the screws.
Troubleshooting Tips
- If you encounter any difficulties while replacing the control board, refer to your dryer’s user manual or contact a qualified appliance repair technician.
- Ensure the new control board is compatible with your Whirlpool dryer model.
- If the dryer still malfunctions after replacing the control board, there might be other underlying issues requiring professional repair.
Final Thoughts
Replacing a Whirlpool dryer control board is a straightforward task that can be completed by most DIY enthusiasts. By following these steps carefully and taking necessary safety precautions, you can restore your dryer to optimal operation without the need for costly repairs.
Frequently Discussed Topics
1. How can I tell if my Whirlpool dryer control board needs replacing?
- Erratic dryer operation, such as inconsistent heating or drying times.
- Error codes or blinking lights on the control panel.
- Unusual noises or smells coming from the dryer.
2. Can I replace the control board myself, or do I need a professional?
- With basic hand tools and some technical knowledge, most homeowners can replace a Whirlpool dryer control board themselves. However, if you’re not comfortable with electrical repairs, it’s advisable to contact a qualified appliance repair technician.
3. How long will it take to replace the control board?
- The replacement time can vary depending on your skill level and the dryer model. Generally, it takes around 30 minutes to 1 hour to complete the task.
