Tired Of A Broken Washer? The Fix You Need: How To Replace Maytag Washer Lid Strike

Is your Maytag washer giving you trouble with a faulty lid strike? This essential component ensures that the washer lid stays securely closed during operation, preventing water leaks and potential hazards. Replacing a lid strike is a straightforward task that can be completed in a matter of minutes with the right tools and a bit of know-how. In this comprehensive guide, we’ll walk you through the step-by-step process of replacing a Maytag washer lid strike, empowering you to restore your appliance to optimal performance.

Materials Required

• New Maytag washer lid strike
• Phillips-head screwdriver
• Flat-head screwdriver (optional)

Safety Precautions

Before embarking on this task, ensure your safety by unplugging the washer from the electrical outlet and turning off the water supply.

Step-by-Step Instructions

1. Locate the Lid Strike

Open the washer lid and locate the lid strike, which is typically situated on the top of the washer cabinet, just behind the lid.

2. Remove the Lid

Using a Phillips-head screwdriver, remove the screws holding the lid in place. Carefully lift the lid off the washer.

3. Disconnect the Wires

Locate the wires connected to the lid strike. Gently disconnect them by pressing on the release tabs on the wire connectors.

4. Remove the Old Lid Strike

Using a Phillips-head screwdriver, remove the screws holding the old lid strike in place. Lift the strike straight up to detach it from the cabinet.

5. Install the New Lid Strike

Align the new lid strike with the holes on the cabinet. Insert the screws and tighten them securely using a Phillips-head screwdriver.

6. Reconnect the Wires

Connect the wires to the new lid strike by pushing them into the wire connectors until they snap into place.

7. Replace the Lid

Carefully place the lid back onto the washer and secure it with the screws. Tighten the screws snugly, but avoid overtightening.

Troubleshooting Tips

• If the lid still does not close properly after replacing the strike, check if the washer is level by placing a level on top of the washer. Adjust the leveling legs as necessary.
• Ensure that the lid hinges are not damaged or obstructed. If necessary, replace the hinges or remove any obstructions.
• Test the lid switch by manually pressing on the lid strike. If the washer does not start, the switch may be faulty and require replacement.

Wrapping Up

Replacing a Maytag washer lid strike is a simple and cost-effective repair that can significantly improve the functionality of your appliance. By following these step-by-step instructions, you can confidently tackle this task yourself, saving time and money on professional repairs.

Frequently Asked Questions

Q1: How often should I replace the lid strike?
A1: The frequency of replacement depends on usage and wear and tear. However, it’s generally recommended to inspect the lid strike annually and replace it if it appears damaged or worn.

Q2: Can I use a universal lid strike for my Maytag washer?
A2: It’s not recommended to use a universal lid strike as it may not fit properly or function correctly with your specific Maytag washer model.

Q3: How do I know if the lid switch is faulty?
A3: If the washer does not start when the lid is closed, the lid switch may be faulty. You can test the switch by manually pressing on the lid strike. If the washer still does not start, the switch needs to be replaced.