Banish Dishwasher Rattles! How To Replace Kitchenaid Wheels With Ease
What To Know
- Using a tape measure and pencil, mark the distance from the front edge of the dishwasher to the wall.
- Locate the toe kick panel at the bottom of the dishwasher door and remove it by unscrewing the screws that hold it in place.
- While it is possible to replace a single wheel, it is advisable to replace all four wheels at the same time to ensure even wear and tear.
Is your KitchenAid dishwasher rolling off course or making an excessive racket? The culprit might be worn-out wheels. Replacing dishwasher wheels is a straightforward task that you can tackle yourself, saving you the cost of a service call. This comprehensive guide will walk you through the process step by step, so you can restore your dishwasher to pristine condition.
Materials You’ll Need
- New dishwasher wheels (model-specific)
- Screwdriver
- Socket wrench
- Tape measure
- Pencil
Safety Precautions
Before starting any work, ensure your dishwasher is unplugged from the power source. Also, shut off the water supply to the dishwasher by turning off the water valve beneath the sink.
Step-by-Step Instructions
1. Measure and Mark the Dishwasher’s Position
Using a tape measure and pencil, mark the distance from the front edge of the dishwasher to the wall. This will help you align the dishwasher correctly when reinstalling it.
2. Remove the Toe Kick Panel
Locate the toe kick panel at the bottom of the dishwasher door and remove it by unscrewing the screws that hold it in place.
3. Disconnect the Wires
Once the toe kick panel is removed, you will see the electrical wires connecting the dishwasher to the power supply. Disconnect these wires by unplugging them from their terminals.
4. Remove the Front Leveling Legs
Locate the two front leveling legs at the bottom corners of the dishwasher. Use a socket wrench to unscrew the nuts that hold them in place. Once the nuts are removed, the legs can be pulled out.
5. Pull Out the Dishwasher
Carefully pull the dishwasher out from under the counter. Be mindful of the water supply line and drain hose, which should be disconnected before you pull the dishwasher out completely.
6. Remove the Old Wheels
Flip the dishwasher on its side to access the wheels. Use a screwdriver to remove the screws that hold the wheels in place. Once the screws are removed, the wheels can be pulled off.
7. Install the New Wheels
Align the new wheels with the holes in the dishwasher frame and push them into place. Secure the wheels with screws.
8. Reinstall the Dishwasher
Lift the dishwasher back into place and align it with the marks you made in step 1. Reconnect the water supply line and drain hose.
9. Install the Front Leveling Legs
Reinstall the front leveling legs and tighten the nuts to secure them. Adjust the legs to level the dishwasher.
10. Reconnect the Wires
Reconnect the electrical wires to the terminals on the dishwasher.
11. Install the Toe Kick Panel
Reattach the toe kick panel by screwing it back into place.
12. Test the Dishwasher
Plug the dishwasher back into the power source and turn on the water supply. Run a test cycle to ensure the dishwasher is working properly.
Wrapping Up: A Smooth-Rolling Dishwasher
Replacing your KitchenAid dishwasher wheels is a simple repair that can save you time and money. By following these steps, you can restore your dishwasher to its optimal performance and enjoy a kitchen that runs smoothly.
What People Want to Know
Q: How often should I replace my KitchenAid dishwasher wheels?
A: The lifespan of dishwasher wheels can vary depending on usage and water conditions. Generally, it is recommended to replace them every 3-5 years.
Q: Can I replace just one dishwasher wheel?
A: While it is possible to replace a single wheel, it is advisable to replace all four wheels at the same time to ensure even wear and tear.
Q: What are the signs of worn-out dishwasher wheels?
A: Worn-out dishwasher wheels can cause the dishwasher to roll off course, make excessive noise, or leak water.