Tired Of A Noisy Dryer? Here’S The Easy Fix To Replace Your Kenmore Elite Dryer Belt
What To Know
- Once the belt is in place, use the screwdriver or nut driver to tighten the tensioner pulley.
- If the belt is extremely worn or broken, it may be necessary to replace the idler pulley as well.
- Can I use a generic dryer belt instead of a Kenmore Elite belt.
Have you noticed your Kenmore Elite dryer is taking longer to dry clothes, or even worse, not drying them at all? A worn-out dryer belt could be the culprit. Replacing the belt is a relatively straightforward task that you can do yourself with a few simple tools. In this comprehensive guide, we’ll walk you through the step-by-step process of how to replace Kenmore Elite dryer belt.
Tools and Materials You’ll Need
- New Kenmore Elite dryer belt
- Screwdriver or nut driver
- Putty knife
- Flashlight (optional)
Safety Precautions
Before you begin, always unplug the dryer from the power outlet. Allow the dryer to cool down completely to prevent burns.
Step-by-Step Instructions
1. Remove the Front Panel
Locate the two screws at the bottom of the dryer’s front panel. Remove the screws and carefully pull the panel towards you to detach it.
2. Locate the Drum Belt
Behind the front panel, you’ll see the dryer drum. The belt runs around the drum and is connected to the motor pulley.
3. Remove the Old Belt
Use the putty knife to gently pry the old belt off the motor pulley. Be careful not to damage the pulley.
4. Install the New Belt
Position the new belt around the motor pulley. Ensure that the belt is properly aligned with the pulley grooves.
5. Stretch the Belt
Hold the belt taut and slip it over the drum. Use the putty knife to help guide the belt into place.
6. Tighten the Belt
Once the belt is in place, use the screwdriver or nut driver to tighten the tensioner pulley. The belt should be snug but not overly tight.
7. Reassemble the Dryer
Reattach the front panel by aligning it with the corresponding holes and inserting the screws. Tighten the screws securely.
Tips
- If you have trouble seeing inside the dryer, use a flashlight to illuminate the area.
- If the belt is extremely worn or broken, it may be necessary to replace the idler pulley as well.
- Consider replacing the belt every 2-3 years to ensure optimal dryer performance.
Wrapping It Up: A Dryer with a New Lease on Life
Replacing the Kenmore Elite dryer belt is a simple yet effective way to restore your dryer’s efficiency. By following these steps, you can save time and money while ensuring your clothes get dried correctly every time.
Frequently Asked Questions
Q: How often should I replace my Kenmore Elite dryer belt?
A: Every 2-3 years, or more frequently if you notice decreased drying performance.
Q: Can I use a generic dryer belt instead of a Kenmore Elite belt?
A: It’s recommended to use a genuine Kenmore Elite dryer belt for optimal fit and performance.
Q: What are the signs of a worn-out dryer belt?
A: Longer drying times, excessive noise, or the dryer not drying clothes at all.