Say Goodbye To Dryers That Don’T Dry: How To Easily Replace A Kenmore Dryer Thermal Fuse
What To Know
- Replacing a thermal fuse in a Kenmore dryer is a relatively simple task that can be completed in under 30 minutes.
- Use a screwdriver to remove the screw that holds the thermal fuse in place.
- Replacing a thermal fuse in a Kenmore dryer is a simple task that can be completed in under 30 minutes.
Replacing a thermal fuse in a Kenmore dryer is a relatively simple task that can be completed in under 30 minutes. By following these step-by-step instructions, you can save yourself the cost of a service call and get your dryer back up and running quickly.
Tools and Materials You’ll Need:
- New thermal fuse
- Screwdriver
- Pliers
- Safety glasses
How to Replace Kenmore Dryer Thermal Fuse
1. Safety First
Before you begin, unplug your dryer from the power outlet and put on safety glasses.
2. Locate the Thermal Fuse
The thermal fuse is typically located on the back of the dryer, near the heating element. It is a small, cylindrical device with two wires connected to it.
3. Disconnect the Wires
Use pliers to carefully disconnect the two wires from the thermal fuse.
4. Remove the Old Thermal Fuse
Use a screwdriver to remove the screw that holds the thermal fuse in place. Once the screw is removed, you can pull the old thermal fuse out of the housing.
5. Install the New Thermal Fuse
Insert the new thermal fuse into the housing and tighten the screw to secure it.
6. Reconnect the Wires
Connect the two wires to the new thermal fuse. Make sure that the wires are securely fastened.
7. Test the Dryer
Plug your dryer back into the power outlet and turn it on. If the dryer starts heating up, you have successfully replaced the thermal fuse.
Troubleshooting Tips
- If your dryer is still not heating up after replacing the thermal fuse, there may be another problem. Check the heating element and thermostat for any signs of damage.
- If the thermal fuse blows again after you replace it, there may be a more serious problem with your dryer. Contact a qualified appliance repair technician for assistance.
Additional Tips
- It is a good idea to replace the thermal fuse every few years, even if it is not blown. This will help to prevent your dryer from overheating and causing a fire.
- If you are not comfortable replacing the thermal fuse yourself, you can contact a qualified appliance repair technician for assistance.
Wrapping Up
Replacing a thermal fuse in a Kenmore dryer is a simple task that can be completed in under 30 minutes. By following these step-by-step instructions, you can save yourself the cost of a service call and get your dryer back up and running quickly.
Frequently Asked Questions
Q: How do I know if my Kenmore dryer thermal fuse is blown?
A: If your dryer is not heating up, the thermal fuse may be blown. To test the thermal fuse, use a multimeter to check for continuity. If there is no continuity, the thermal fuse is blown and needs to be replaced.
Q: Where can I buy a replacement Kenmore dryer thermal fuse?
A: You can purchase a replacement Kenmore dryer thermal fuse at most hardware stores or online retailers.
Q: How often should I replace my Kenmore dryer thermal fuse?
A: It is a good idea to replace the thermal fuse every few years, even if it is not blown. This will help to prevent your dryer from overheating and causing a fire.
