Shockingly Easy: Replace Your Kenmore Dryer Motor In Minutes

Replacing a Kenmore dryer motor might seem daunting, but with the right tools and a step-by-step guide, you can tackle this task like a pro. This comprehensive blog post will equip you with all the knowledge and instructions you need to breathe new life into your trusty Kenmore dryer.

Tools You’ll Need

Before embarking on this adventure, gather the following tools:

• Screwdriver (Phillips and flathead)
• Socket wrench (1/4-inch and 5/16-inch)
• Ratchet
• Multimeter
• Safety glasses
• Gloves
• New Kenmore dryer motor

Safety Precautions

Safety first! Before you dive into the task, remember these precautions:

• Unplug the dryer from the power source.
• Allow the dryer to cool down completely.
• Wear safety glasses and gloves to protect yourself.

Step-by-Step Instructions

1. Remove the Back Panel

Locate the back panel of your Kenmore dryer and detach it using the screwdriver.

2. Disconnect the Electrical Connections

Carefully unplug the wires connected to the motor. Use the multimeter to confirm that the motor is faulty.

3. Remove the Motor Pulley

Using the socket wrench, loosen and remove the motor pulley.

4. Unbolt the Motor

Use the socket wrench to unbolt the mounting bolts holding the motor in place.

5. Remove the Old Motor

Carefully lift the old motor out of its housing.

6. Install the New Motor

Place the new motor into the housing and secure it with the mounting bolts.

7. Reattach the Motor Pulley

Slide the motor pulley back onto the motor shaft and tighten it with the socket wrench.

8. Reconnect the Electrical Connections

Plug the wires back into the new motor, ensuring proper connections.

9. Reinstall the Back Panel

Replace the back panel and secure it with the screws.

Troubleshooting

If you encounter any issues during the replacement process, refer to these troubleshooting tips:

• Check for loose connections: Ensure all wires are securely connected.
• Verify the motor is compatible: Confirm that the new motor matches the specifications of your Kenmore dryer.
• Reset the dryer: Once the motor is replaced, reset the dryer by unplugging it for a few minutes before plugging it back in.

Maintenance Tips

To keep your Kenmore dryer running smoothly, follow these maintenance tips:

• Clean the lint filter regularly.
• Inspect the dryer vent hose for clogs.
• Lubricate the dryer motor bearings periodically.

Wrapping Up

Congratulations! You have successfully replaced the motor of your Kenmore dryer. This DIY project not only saves you money but also extends the lifespan of your appliance. Remember to prioritize safety and follow the instructions carefully.

Questions We Hear a Lot

Q: Can I replace the Kenmore dryer motor myself?

A: Yes, with the right tools and instructions, you can replace the motor yourself.

Q: How long does it take to replace a Kenmore dryer motor?

A: The replacement process typically takes around 1-2 hours.

Q: What are the symptoms of a faulty Kenmore dryer motor?

A: Excessive noise, slow or no spinning, and overheating can indicate a faulty motor.