Say Goodbye To Slow Drying: Master The Art Of Replacing Your Kenmore Dryer Belt Like A Pro

Replacing a Kenmore dryer belt is a straightforward task that can save you both time and money. With the right tools and a bit of patience, you can have your dryer up and running again in no time.

Tools You’ll Need

• New Kenmore dryer belt
• Screwdriver
• Pliers
• Gloves (optional)

Safety Precautions

• Unplug the dryer from the power outlet before starting any work.
• Allow the dryer to cool down completely before handling any parts.
• Wear gloves to protect your hands from sharp edges.

Step-by-Step Guide

1. Remove the Rear Panel

• Use a screwdriver to remove the screws holding the rear panel in place.
• Carefully lift the panel off the dryer.

2. Locate the Tension Pulley

• The tension pulley is usually located at the top of the dryer, near the motor.
• It is a small, spring-loaded pulley that helps keep the belt taut.

3. Release the Tension

• Use pliers to gently squeeze the tension pulley together.
• This will release the tension on the belt.

4. Remove the Belt

• Slip the old belt off the pulleys.
• Inspect the belt for any signs of damage or wear.

5. Install the New Belt

• Place the new belt over the motor pulley.
• Loop the belt around the idler pulley.
• Finally, hook the belt onto the tension pulley.

6. Tighten the Belt

• Use pliers to tighten the tension pulley.
• Ensure the belt is taut but not overly tight.

7. Reassemble the Dryer

• Replace the rear panel and secure it with the screws.
• Plug the dryer back into the power outlet.

Troubleshooting Tips

• If the belt is too loose, the dryer may make a squealing noise.
• If the belt is too tight, it can cause the motor to overheat.
• If the dryer still doesn’t work after replacing the belt, there may be another issue that needs to be addressed.

The Benefits of Replacing Your Dryer Belt

• Improved dryer performance
• Reduced energy consumption
• Extended dryer lifespan
• Cost savings

Recommendations: A Rewarding DIY Project

Replacing a Kenmore dryer belt is a simple and rewarding task that can save you money and keep your dryer running smoothly. By following these steps and taking the necessary safety precautions, you can ensure that your dryer will continue to provide you with years of reliable service.

Questions We Hear a Lot

Q: How often should I replace my dryer belt?
A: Typically, a dryer belt should be replaced every 5-7 years or as soon as it shows signs of damage or wear.

Q: Can I use any type of belt to replace my Kenmore dryer belt?
A: No, it is important to use a Kenmore-approved belt that is specifically designed for your model of dryer.

Q: What are the signs that my dryer belt needs to be replaced?
A: Some common signs include a squealing noise during operation, reduced drying performance, and overheating of the motor.