Beautifying homes with fresh paint
Guide

Ultimate Guide To Troubleshooting And Replacing Kenmore Dishwasher Pump

Mark Evans is the owner and operator of Nesting Nicely home paint blog. With over 15 years of experience in the painting industry, he is passionate about helping homeowners find the right paint colors and solutions for their living spaces. Mark got his start in the family painting business and...

What To Know

  • If the dishwasher is making strange noises, it could be a sign that the pump is not functioning properly.
  • Replacing the pump in your Kenmore dishwasher is a relatively straightforward repair that you can do yourself with the right tools and instructions.
  • The cost to replace a Kenmore dishwasher pump can vary depending on the model and the cost of the replacement part.

Is your Kenmore dishwasher giving you trouble? If it’s not draining properly or making strange noises, it could be a sign that the pump is failing. Replacing the pump is a relatively straightforward repair that you can do yourself with the right tools and instructions.

Tools and Materials You’ll Need

  • New Kenmore dishwasher pump
  • Screwdriver
  • Pliers
  • Wire cutters
  • Multimeter (optional)
  • Bucket or large bowl
  • Rags or towels

Safety Precautions

  • Unplug the dishwasher from the power outlet.
  • Turn off the water supply to the dishwasher.
  • Wear safety glasses and gloves to protect yourself from sharp edges and electrical hazards.

Step-by-Step Instructions

1. Remove the Access Panel

Locate the access panel at the bottom of the dishwasher door. Use a screwdriver to remove the screws that hold it in place.

2. Disconnect the Power and Water Lines

Inside the access panel, you will see the power cord and water lines connected to the dishwasher. Disconnect the power cord by unplugging it from the electrical outlet. Disconnect the water lines by using pliers to loosen the nuts that hold them in place.

3. Remove the Old Pump

Use a screwdriver to remove the screws that hold the old pump in place. Carefully pull the pump out of the dishwasher.

4. Inspect the Impeller

The impeller is the part of the pump that spins to move the water. Inspect it for any damage or debris. If the impeller is damaged, you will need to replace the entire pump.

5. Install the New Pump

Insert the new pump into the dishwasher and align the screw holes. Secure the pump with the screws.

6. Reconnect the Power and Water Lines

Reconnect the power cord to the electrical outlet. Reconnect the water lines by tightening the nuts that hold them in place.

7. Test the Dishwasher

Run the dishwasher through a full cycle to test the new pump. Check for any leaks or unusual noises.

Troubleshooting Tips

  • If the dishwasher is still not draining properly, check the drain hose for any kinks or clogs.
  • If the dishwasher is making strange noises, it could be a sign that the pump is not functioning properly.
  • If you are not comfortable replacing the pump yourself, call a qualified appliance repair technician.

Wrapping Up

Replacing the pump in your Kenmore dishwasher is a relatively straightforward repair that you can do yourself with the right tools and instructions. By following these steps carefully, you can save time and money while getting your dishwasher back up and running in no time.

Frequently Asked Questions

Q: How do I know if my Kenmore dishwasher pump is failing?

A: Signs of a failing dishwasher pump include poor draining, strange noises, and water leaks.

Q: What is the average lifespan of a Kenmore dishwasher pump?

A: The average lifespan of a Kenmore dishwasher pump is 5-7 years.

Q: How much does it cost to replace a Kenmore dishwasher pump?

A: The cost to replace a Kenmore dishwasher pump can vary depending on the model and the cost of the replacement part. However, you can expect to pay between $100 and $200 for the pump itself.

Was this page helpful?

Mark Evans

Mark Evans is the owner and operator of Nesting Nicely home paint blog. With over 15 years of experience in the painting industry, he is passionate about helping homeowners find the right paint colors and solutions for their living spaces. Mark got his start in the family painting business and has since grown Nesting Nicely to be a top resource for home painting projects both large and small. When he isn't blogging, you can find Mark working with clients one-on-one to help transform their homes with the perfect coat of paint. He lives in small town America with his wife Sarah and their two children.
Back to top button