Kenmore 80 Series Dryer Heating Element Replacement: The Ultimate Diy Fix
What To Know
- Replacing a heating element in a Kenmore 80 series dryer may seem daunting, but with the right instructions and a bit of patience, it’s a task that can be accomplished by most homeowners.
- Align the holes on the element with the holes on the housing.
- Yes, with the right tools and instructions, most homeowners can replace the heating element in a Kenmore 80 series dryer.
Replacing a heating element in a Kenmore 80 series dryer may seem daunting, but with the right instructions and a bit of patience, it’s a task that can be accomplished by most homeowners. This comprehensive guide will provide you with clear, step-by-step instructions on how to replace the heating element in your Kenmore 80 series dryer.
Safety First
Before you begin, it’s crucial to ensure your safety. Unplug the dryer from the power outlet and allow it to cool completely. Wear safety gloves and eye protection throughout the process.
Tools and Materials
- New heating element for Kenmore 80 series dryer
- Screwdriver
- Nut driver
- Multimeter (optional)
Step-by-Step Instructions
1. Remove the Front Panel
Locate the two screws at the bottom of the front panel. Remove these screws and gently lift the front panel upwards to detach it from the dryer.
2. Disconnect the Wires
Disconnect the wires connected to the heating element. Use a screwdriver to loosen the terminal screws and pull the wires free.
3. Remove the Heating Element
Locate the two nuts that secure the heating element to the dryer housing. Use a nut driver to remove these nuts. Carefully pull the heating element out of the dryer.
4. Inspect the Heating Element
Inspect the old heating element for any damage or burn marks. If the element is broken or damaged, it is necessary to replace it.
5. Install the New Heating Element
Insert the new heating element into the dryer housing. Align the holes on the element with the holes on the housing. Secure the element with the two nuts.
6. Reconnect the Wires
Reconnect the wires to the heating element. Tighten the terminal screws using a screwdriver.
7. Reinstall the Front Panel
Place the front panel back onto the dryer and align the screws. Tighten the screws to secure the panel.
Troubleshooting
1. Dryer Not Heating
- Check if the heating element is properly installed and connected.
- Use a multimeter to test the heating element for continuity.
2. Dryer Overheating
- Check the temperature sensor for any damage or debris.
- Ensure the dryer vent is clear of obstructions.
3. Dryer Making Noise
- Check if the heating element is loose or rubbing against the dryer housing.
- Ensure the dryer drum is balanced.
Finishing Up
Once you have successfully replaced the heating element, plug the dryer back into the power outlet and test it. If the dryer heats properly, you have successfully completed the repair.
Beyond Conclusion: Tips for Dryer Maintenance
- Clean the dryer vent regularly to prevent lint buildup.
- Inspect the heating element periodically for any damage.
- Replace the dryer belt every 5-7 years to prevent it from breaking.
What You Need to Learn
Q: Can I replace the heating element myself?
A: Yes, with the right tools and instructions, most homeowners can replace the heating element in a Kenmore 80 series dryer.
Q: How often should I replace the heating element?
A: The frequency of replacement depends on usage. However, it’s generally recommended to replace the heating element every 5-7 years.
Q: What are the signs of a faulty heating element?
A: Signs of a faulty heating element include the dryer not heating, overheating, or making noise.
