Tired Of A Noisy Dryer? How To Replace Your Kenmore 70 Series Dryer Belt In A Snap
What To Know
- Locate the two screws at the bottom of the back panel and remove them using a Phillips screwdriver.
- Replacing the dryer belt on your Kenmore 70 Series dryer is a straightforward task that you can confidently tackle with the right tools and a bit of patience.
- Enjoy the satisfaction of a job well done and the convenience of a smoothly functioning dryer.
Is your Kenmore 70 Series dryer taking an eternity to dry your clothes or making strange noises? A worn-out dryer belt could be the culprit. Replacing it yourself is a budget-friendly and satisfying DIY project. Follow this comprehensive guide to learn how to replace the Kenmore 70 Series dryer belt like a pro.
Safety First
Before embarking on this task, ensure your safety by:
- Unplugging the dryer from the power outlet.
- Allowing the dryer to cool completely.
- Wearing safety glasses and gloves.
Tools and Materials
Gather the following tools and materials:
- New Kenmore 70 Series dryer belt
- Screwdriver (Phillips and flathead)
- Adjustable wrench
- Flashlight (optional)
Step-by-Step Instructions
1. Remove the Back Panel
- Locate the two screws at the bottom of the back panel and remove them using a Phillips screwdriver.
- Carefully lift the back panel off the dryer.
2. Locate the Belt
- Once the back panel is removed, you’ll see the belt wrapped around the drum and pulleys.
3. Remove the Tension Spring
- Use an adjustable wrench to loosen the tension spring on the idler pulley.
- Once loose, remove the spring.
4. Remove the Old Belt
- Grip the old belt and pull it off the drum and pulleys.
5. Install the New Belt
- Place the new belt around the drum first, ensuring it’s aligned correctly.
- Then, loop it around the idler pulley and motor pulley.
6. Tighten the Tension Spring
- Reinstall the tension spring on the idler pulley.
- Use the adjustable wrench to tighten the spring until the belt has about 1/2 to 1 inch of play.
7. Reinstall the Back Panel
- Lift the back panel back into place and secure it with the two screws you removed earlier.
Troubleshooting Tips
- If the belt continues to slip or make noise, check for any obstructions or damage to the pulleys or belt.
- Ensure the belt is properly aligned and not twisted or kinked.
- If you encounter any difficulties, don’t hesitate to consult a qualified appliance repair technician.
Benefits of Replacing the Dryer Belt
- Reduced drying time
- Quieter operation
- Improved energy efficiency
- Extended dryer lifespan
In a nutshell: Master the Art of Dryer Belt Replacement
Replacing the dryer belt on your Kenmore 70 Series dryer is a straightforward task that you can confidently tackle with the right tools and a bit of patience. By following these detailed instructions, you’ll restore your dryer to optimal performance and save yourself the expense of professional repair. Enjoy the satisfaction of a job well done and the convenience of a smoothly functioning dryer!
Frequently Asked Questions
Q: How often should I replace my Kenmore 70 Series dryer belt?
A: The recommended replacement interval for a Kenmore 70 Series dryer belt is approximately every 2-3 years or after 1,500-2,000 drying cycles.
Q: Can I use an aftermarket dryer belt?
A: While it’s possible to use an aftermarket belt, it’s highly recommended to use a genuine Kenmore replacement belt to ensure compatibility and optimal performance.
Q: What are the signs of a worn-out dryer belt?
A: Common symptoms of a worn-out dryer belt include:
- Longer drying times
- Unusual noises during operation
- Slipping or snapping of the belt