Step-By-Step Guide To Removing Ringer From Washer: A Problem Solved

A ringing washer can be a frustrating and noisy problem. The culprit behind this disturbance is often a small metal object, known as a ringer, that has become lodged in the washer’s drain pump. Removing the ringer can restore your washer’s tranquility and ensure its efficient operation. In this comprehensive guide, we will delve into the step-by-step process of removing a ringer from your washer, empowering you to tackle this task with confidence.

Gather Essential Tools

Before embarking on this repair, it’s essential to gather the necessary tools:

• Screwdriver (Phillips or flathead)
• Pliers
• Flashlight
• Bucket or drain pan
• Gloves (optional)

Locate the Drain Pump

The drain pump is typically located at the bottom of the washer, behind a small access panel. Locate the panel and remove it using a screwdriver.

Disconnect the Washer

For safety reasons, unplug the washer from the power outlet and turn off the water supply.

Remove the Drain Hose

Locate the drain hose, which is connected to the drain pump. Use pliers to loosen the hose clamp and detach the hose. Place a bucket or drain pan beneath the hose to catch any water that may leak out.

Access the Drain Pump

Once the drain hose is removed, you should be able to see the drain pump. It is usually held in place by a few screws. Use a screwdriver to remove the screws and carefully pull out the drain pump.

Inspect the Drain Pump

Inspect the drain pump for any visible objects or debris. If you find a ringer, use pliers to carefully remove it. Be cautious not to damage the pump or its components.

Clean the Drain Pump

Take this opportunity to clean the drain pump and remove any other debris that may have accumulated. Use a damp cloth or brush to wipe away any dirt or grime.

Reassemble the Washer

Once the drain pump is clean and the ringer has been removed, reassemble the washer in the reverse order of disassembly.

1. Insert the drain pump back into its housing and secure it with the screws.
2. Reconnect the drain hose and tighten the hose clamp.
3. Reinstall the access panel and secure it with screws.
4. Reconnect the washer to the power outlet and water supply.

Test the Washer

Run a test cycle to ensure that the washer is operating properly and that the ringer has been successfully removed. Listen for any unusual noises or vibrations.

Troubleshooting

If you encounter any difficulties during the repair process, consider the following troubleshooting tips:

• If you cannot locate the ringer, use a flashlight to illuminate the drain pump and its surroundings.
• If the ringer is stuck or difficult to remove, use pliers to gently loosen it.
• If you damage the drain pump during the repair, it may need to be replaced. Contact a qualified appliance repair technician for assistance.

Prevention Tips

To prevent future ringer incidents, consider these preventive measures:

• Regularly check the washer’s drain pump for any debris or objects that may become lodged.
• Avoid overloading the washer, as this can put extra strain on the drain pump.
• Use mesh laundry bags to prevent small items from slipping out of clothes and into the drain.

Common Questions and Answers

Q: Why is my washer making a ringing noise?
A: A ringing noise in a washer is often caused by a small metal object, known as a ringer, that has become lodged in the drain pump.

Q: How often should I check my washer’s drain pump?
A: It’s recommended to check the drain pump every few months or whenever the washer is making unusual noises.

Q: Can I remove a ringer from my washer without disconnecting it from power?
A: For safety reasons, it’s strongly advised to disconnect the washer from power before attempting to remove a ringer.