Unclog Your Primo Water Dispenser Drip Tray In A Snap: The Ultimate Guide

Spills and drips are an inevitable part of using a water dispenser, and the Primo water dispenser is no exception. The drip tray is an essential component that collects any excess water, but it can become full and need to be emptied and cleaned regularly. This guide will provide you with step-by-step instructions on how to remove the Primo water dispenser drip tray so you can keep your dispenser clean and in good working condition.

Materials You’ll Need

• Clean cloth or paper towels
• Bucket or sink

Step-by-Step Instructions

1. Unplug the Water Dispenser

Safety first! Before you start, unplug the water dispenser from the power outlet. This will prevent any electrical accidents.

2. Locate the Drip Tray

The drip tray is located at the bottom of the water dispenser. It’s a removable plastic tray that catches any water that spills or drips from the dispenser.

3. Empty the Drip Tray

Before you can remove the drip tray, you need to empty it. Use a clean cloth or paper towels to absorb any excess water. You can also pour the water into a bucket or sink.

4. Grip the Drip Tray

Once the drip tray is empty, grip it firmly with both hands. Make sure you have a good hold on it, as it can be slippery.

5. Pull the Drip Tray Straight Out

Slide the drip tray straight out towards you. It should come out easily with a gentle tug.

6. Clean the Drip Tray

Now that you have removed the drip tray, it’s time to clean it. Use a clean cloth or sponge and some mild dish soap to wash it thoroughly. Rinse it well with clean water and dry it completely before putting it back in place.

7. Reinsert the Drip Tray

Once the drip tray is clean and dry, slide it back into the water dispenser. Make sure it’s properly aligned and sits securely in place.

8. Plug the Water Dispenser Back In

Finally, plug the water dispenser back into the power outlet and turn it on. You should now be able to use your water dispenser without any drips or spills.

Tips for Maintaining Your Primo Water Dispenser

• Clean the drip tray regularly to prevent mold and bacteria buildup.
• Wipe down the exterior of the water dispenser with a clean cloth to remove any dirt or dust.
• Change the water filter every 6 months to ensure clean, fresh water.
• If you’re going on vacation or won’t be using the water dispenser for an extended period, unplug it and drain any remaining water to prevent damage.

Troubleshooting

• The drip tray is stuck and won’t come out. If the drip tray is stuck, try gently wiggling it back and forth while pulling it out. You can also use a butter knife or other thin object to pry it loose.
• The drip tray is leaking. If the drip tray is leaking, check the seals around the edges for any damage. You may need to replace the seals or the entire drip tray.
• The water dispenser is dripping from the bottom. If the water dispenser is dripping from the bottom, it’s likely that the water filter needs to be replaced.

Summary: Keep Your Primo Water Dispenser Clean and Drip-Free

By following these simple steps, you can easily remove the Primo water dispenser drip tray and keep your dispenser clean and in good working condition. Regular maintenance will ensure that you have a reliable source of clean, fresh water for years to come.

Questions We Hear a Lot

1. How often should I clean the drip tray?

You should clean the drip tray every few weeks, or more often if you notice any spills or drips.

2. Can I use bleach to clean the drip tray?

No, do not use bleach to clean the drip tray. Bleach can damage the plastic and leave behind a strong odor.

3. What if the drip tray is cracked or damaged?

If the drip tray is cracked or damaged, you should replace it immediately. A damaged drip tray can leak and cause water damage.