Bye-Bye Clogs! Learn The Secret To Removing Your Kitchenaid Dishwasher Filter

A clogged dishwasher filter can significantly hinder your dishwasher’s performance, leading to unsatisfactory cleaning results. Fortunately, removing and cleaning the filter is a simple task that can be completed in a few minutes. This comprehensive guide will provide you with step-by-step instructions on how to remove a KitchenAid dishwasher filter, ensuring your dishwasher operates at its optimal level.

Identifying the Filter Location

The location of the dishwasher filter varies depending on the specific KitchenAid model. However, it is typically found in one of two places:

• Bottom of the Dishwasher: Look for a cylindrical or rectangular filter located on the floor of the dishwasher, usually near the center.
• Side of the Dishwasher: Some models have the filter located on the side of the dishwasher door, behind a removable panel.

Step-by-Step Removal Guide

1. Unplug the Dishwasher

Safety first! Always unplug the dishwasher from the power outlet before attempting any maintenance.

2. Locate the Filter

Refer to the previous section to identify the location of the filter in your KitchenAid dishwasher.

3. Remove the Filter Cover (if applicable)

Some KitchenAid dishwasher models have a removable cover that protects the filter. If your model has one, carefully lift or slide it off.

4. Unscrew the Filter

Most KitchenAid dishwasher filters are secured with a screw. Use a screwdriver to loosen and remove the screw.

5. Pull Out the Filter

Once the screw is removed, gently pull out the filter from its housing.

6. Clean the Filter

Rinse the filter thoroughly with warm water to remove any food residue or debris. If necessary, use a soft brush or sponge to gently scrub away any stubborn particles.

7. Reinstall the Filter

After cleaning, insert the filter back into its housing. Make sure it is properly aligned and seated.

8. Tighten the Screw

Secure the filter by tightening the screw.

9. Replace the Filter Cover (if applicable)

If your dishwasher model has a filter cover, slide or snap it back into place.

10. Plug in the Dishwasher

Once the filter is reinstalled, plug the dishwasher back into the power outlet.

Maintaining Your Dishwasher Filter

• Regularly check the filter for clogs or debris.
• Clean the filter every 1-2 months, or more frequently if you have a heavily used dishwasher.
• Replace the filter every 6-12 months, depending on usage and water quality.

Troubleshooting Filter Issues

• Dishwasher is Not Draining: A clogged filter can prevent the dishwasher from draining properly. Clean or replace the filter to resolve the issue.
• Dishwasher is Not Cleaning Dishes: A clogged filter can reduce water pressure and impair the dishwasher’s cleaning ability. Clean or replace the filter to improve performance.
• Dishwasher is Making Noise: A clogged filter can create excessive noise during the wash cycle. Clean or replace the filter to eliminate the noise.

The Bottom Line: Keep Your Dishwasher Running Smoothly

By following these simple steps, you can effortlessly remove and clean the filter in your KitchenAid dishwasher, ensuring its efficient operation and sparkling clean dishes. Remember to maintain the filter regularly to prevent clogs and extend the lifespan of your dishwasher.

What You Need to Learn

1. How often should I clean my KitchenAid dishwasher filter?

Every 1-2 months, or more frequently if you have a heavily used dishwasher.

2. How do I know if my KitchenAid dishwasher filter is clogged?

Signs of a clogged filter include poor drainage, reduced cleaning performance, and excessive noise during the wash cycle.

3. Where can I purchase a replacement filter for my KitchenAid dishwasher?

Replacement filters can be purchased from authorized KitchenAid dealers, hardware stores, or online retailers.