Diy Drain Pump Removal For Asko Dishwashers: Save Time And Money With This Simple Tutorial

If your Asko dishwasher is leaving you with a sink full of dirty dishes, the drain pump may be the culprit. While replacing the pump can be a daunting task, our comprehensive guide will walk you through the process, empowering you to tackle this repair with confidence.

Why Remove the Drain Pump?

A malfunctioning drain pump can prevent your dishwasher from draining properly, resulting in water accumulation within the appliance. This can lead to unpleasant odors, mold growth, and further damage to the dishwasher.

Tools and Materials You’ll Need:

• Phillips head screwdriver
• Flat head screwdriver
• Bucket
• Towel
• Replacement drain pump

Safety First:

Before starting any work, ensure your dishwasher is unplugged from the electrical outlet and the water supply is turned off.

Step-by-Step Removal Guide:

1. Access the Dishwasher:

• Open the dishwasher door and remove the lower dishrack.
• Locate the access panel at the bottom of the dishwasher.
• Remove the screws holding the panel in place and lift it off.

2. Disconnect the Drain Hose:

• Identify the drain hose connected to the drain pump.
• Use a pair of pliers to loosen the hose clamp and disconnect the hose.
• Allow any remaining water to drain into a bucket.

3. Remove the Pump Housing:

• Locate the screws securing the drain pump housing to the dishwasher.
• Remove the screws and carefully lift the housing out.

4. Detach the Motor from the Pump:

• Unplug the electrical connector from the motor.
• Use a Phillips head screwdriver to remove the screws holding the motor in place.
• Carefully separate the motor from the pump.

5. Remove the Impeller:

• Locate the impeller, a plastic blade-like component inside the pump housing.
• Use a flat head screwdriver to gently pry the impeller loose.
• Clean any debris or obstructions from the impeller and its housing.

6. Replace the Drain Pump:

• Align the new drain pump with the housing and insert it into place.
• Secure the pump with the screws.
• Reattach the motor and connect the electrical connector.

7. Reinstall the Pump Housing:

• Carefully place the pump housing back into its designated area.
• Secure it with the screws.

8. Reconnect the Drain Hose:

• Slide the drain hose onto the drain pump and tighten the hose clamp.

9. Replace the Access Panel:

• Lift the access panel onto the dishwasher and secure it with the screws.

Troubleshooting Tips:

• If the dishwasher still fails to drain after replacing the pump, check the drain hose for kinks or blockages.
• Ensure the impeller is correctly installed and free of debris.
• Inspect the electrical connections to ensure they are secure.

Wrap Up: A Renewed Dishwasher

Congratulations! You have successfully removed and replaced the drain pump in your Asko dishwasher. By following these steps, you have restored your appliance to its optimal performance, saving you time and money on repairs.

FAQ:

Q: Can I remove the drain pump without disconnecting the dishwasher from the power supply?
A: For safety reasons, it is highly recommended to unplug the dishwasher before performing any repairs.

Q: How often should I replace the drain pump?
A: The lifespan of a drain pump varies depending on usage and maintenance. However, it is generally recommended to replace the pump every 5-7 years.

Q: What are the signs of a failing drain pump?
A: Common signs include water accumulation in the dishwasher, unpleasant odors, and difficulty draining water.