How To Remove Agitator From Maytag Washer Mvwb765Fw3
What To Know
- If the agitator shaft remains in the tub, use the adjustable wrench to loosen the nut that holds it in place.
- If you removed the agitator shaft, insert it back into the tub and tighten the nut with the adjustable wrench.
- If a tab breaks, use a zip tie or wire to secure the agitator in place.
Is your Maytag washer MVWB765FW3 agitator giving you headaches? Removing it can be a daunting task, but with the right guidance, it’s a breeze. This comprehensive guide will walk you through every step, empowering you to tackle this project with confidence.
Gather Essential Tools
Before you begin, ensure you have the following tools at hand:
- Adjustable wrench
- Socket wrench with a 7/16″ socket
- Flathead screwdriver
- Hammer (optional)
Safety Precautions
- Unplug the washer from the power outlet for safety.
- Turn off the water supply to the washer.
Step-by-Step Removal Instructions
1. Remove the Cap and Bolt
- Locate the cap on top of the agitator.
- Using a flathead screwdriver, pry off the cap.
- Beneath the cap, you’ll find a bolt.
- Use the socket wrench to loosen and remove the bolt.
2. Lift the Agitator Slightly
- Gently lift the agitator straight up a few inches.
- Do not pull on it as it’s still connected at the bottom.
3. Disconnect the Agitator
- Reach inside the washer tub and locate the three plastic tabs that connect the agitator to the transmission.
- Use a flathead screwdriver to pry open each tab.
- Carefully pull the agitator straight up and out of the tub.
4. Remove the Agitator Shaft
- If the agitator shaft remains in the tub, use the adjustable wrench to loosen the nut that holds it in place.
- Pull the shaft out by hand.
5. Clean the Washer Tub (Optional)
- Take this opportunity to clean any residue or mineral buildup from the washer tub.
6. Reassemble the Agitator
- If you removed the agitator shaft, insert it back into the tub and tighten the nut with the adjustable wrench.
- Align the agitator with the transmission and push it down until it fits snugly.
- Snap the three plastic tabs into place to secure the agitator.
7. Install the Bolt and Cap
- Place the bolt back into the hole on top of the agitator.
- Use the socket wrench to tighten the bolt.
- Replace the cap by pressing it onto the agitator.
Troubleshooting Tips
- Agitator won’t come off: Use a hammer to gently tap the agitator around the base.
- Plastic tabs break: If a tab breaks, use a zip tie or wire to secure the agitator in place.
- Agitator shaft won’t loosen: Apply penetrating oil to the nut and let it sit for a few minutes before trying to loosen it.
Wrapping Up: A Washer Refreshed
Congratulations! You’ve successfully removed the agitator from your Maytag washer MVWB765FW3. With your washer back in tip-top shape, you can now enjoy pristine laundry with effortless ease.
Basics You Wanted To Know
Q: Can I remove the agitator from any Maytag washer?
A: This guide is specifically for the Maytag washer MVWB765FW3. Other models may have different removal procedures.
Q: How often should I remove the agitator for cleaning?
A: It depends on usage and water quality. Generally, every 6-12 months is recommended.
Q: What if I accidentally damage the agitator or washer tub?
A: Contact a professional appliance repair technician for assistance. Attempting repairs without proper knowledge can worsen the issue.
