Unlock Your Laundry Woes: Step-By-Step Guide To Reading Maytag Washer Error Codes
What To Know
- In this comprehensive guide, we will walk you through the steps on how to read Maytag washer error codes and provide solutions to the most common errors.
- Maytag washer error codes typically consist of a letter followed by a number.
- If you are unable to resolve the error code on your own, you may need to seek professional help.
When your Maytag washer starts acting up, it can be frustrating. One of the first things you should do is try to identify the error code that’s being displayed. This will help you narrow down the problem and find a solution. In this comprehensive guide, we will walk you through the steps on how to read Maytag washer error codes and provide solutions to the most common errors.
Understanding the Error Code Format
Maytag washer error codes typically consist of a letter followed by a number. The letter indicates the type of error, while the number provides more specific information about the issue.
Letter:
- F: Fault
- E: Error
- H: Hazard
- C: Calibration
Number:
- 01-09: Major component failure
- 10-19: Minor component failure
- 20-29: Calibration errors
- 30-39: Hazard warnings
Common Maytag Washer Error Codes
Here are some of the most common Maytag washer error codes and their possible causes:
F01: Door Lock Failure
- Door is not properly closed
- Door lock mechanism is faulty
E02: Water Inlet Valve Failure
- Water supply is turned off
- Inlet valve is clogged or faulty
F03: Drain Pump Failure
- Drain hose is kinked or clogged
- Drain pump is faulty
F04: Water Level Sensor Failure
- Water level sensor is faulty
- Water level is too high or too low
E05: Motor Control Error
- Motor is not responding
- Motor control board is faulty
F06: Temperature Sensor Failure
- Temperature sensor is faulty
- Water temperature is too high or too low
H07: Overheating Hazard
- Washer is overheating
- Cool-down cycle is not working
How to Reset Maytag Washer Error Codes
Once you have identified the error code, you can try to reset it to see if that solves the problem. To reset a Maytag washer error code:
1. Unplug the washer from the power outlet.
2. Wait 60 seconds.
3. Plug the washer back in.
4. Press and hold the “Start” button for 5 seconds.
5. Release the “Start” button.
Troubleshooting Maytag Washer Error Codes
If resetting the error code does not solve the problem, you may need to troubleshoot the issue further. Here are some troubleshooting tips for common Maytag washer error codes:
F01: Door Lock Failure
- Ensure that the door is properly closed.
- Check the door lock mechanism for any damage.
E02: Water Inlet Valve Failure
- Check that the water supply is turned on.
- Clean the inlet valve screen.
- Replace the inlet valve if it is faulty.
F03: Drain Pump Failure
- Clear any clogs from the drain hose.
- Check the drain pump for any damage.
- Replace the drain pump if it is faulty.
Seeking Professional Help
If you are unable to resolve the error code on your own, you may need to seek professional help. Contact a qualified appliance repair technician to diagnose and repair the issue.
Preventing Maytag Washer Error Codes
Here are some tips to help prevent Maytag washer error codes:
- Use the correct amount of detergent and fabric softener.
- Clean the washer regularly.
- Avoid overloading the washer.
- Check the hoses and connections for any leaks or damage.
A Final Word
By understanding how to read Maytag washer error codes, you can quickly identify and resolve common issues. If you are unable to resolve the error code on your own, do not hesitate to seek professional help. By following these tips, you can keep your Maytag washer running smoothly for years to come.