How To Drain Your Speed Queen Washer: A Step-By-Step Tutorial
What To Know
- To unclog the drainpipe, you can use a drain snake or a chemical drain cleaner.
- A slow-draining washer can be caused by a partial clog in the drain hose, filter, or drainpipe.
- You can use a drain snake or a chemical drain cleaner to unclog a drainpipe.
A clogged drain is a common issue that can prevent your Speed Queen washer from draining properly. The most common causes of clogs are:
- Lint and debris buildup
- Small objects, such as coins or bobby pins
- Mineral deposits
- Detergent buildup
How to Make a Speed Queen Washer Drain
1. Check the Drain Hose
The first step is to check the drain hose for any kinks or obstructions. Make sure the hose is not crushed or pinched, and that it is properly connected to both the washer and the drainpipe.
2. Clean the Drain Pump Filter
The drain pump filter is located at the bottom of the washer. It traps lint and debris that can clog the drain hose. To clean the filter, remove the access panel and pull out the filter. Rinse the filter with water and replace it.
3. Unclog the Drain Pipe
If the drain hose and filter are clear, the clog may be in the drainpipe. To unclog the drainpipe, you can use a drain snake or a chemical drain cleaner.
4. Reset the Washer
If the above steps do not resolve the issue, you can try resetting the washer. To do this, unplug the washer from the power outlet and wait 30 seconds. Then, plug the washer back in and restart the cycle.
5. Call a Professional
If you have tried all of the above steps and your washer is still not draining, you may need to call a professional appliance repair technician.
Other Causes of Drainage Problems
In some cases, a drainage problem may be caused by a mechanical issue with the washer. These issues can include:
- A faulty drain pump
- A broken belt
- A clogged water inlet valve
If you suspect that your washer has a mechanical issue, it is important to call a professional appliance repair technician for diagnosis and repair.
Tips for Preventing Drainage Problems
To help prevent drainage problems, you can follow these tips:
- Clean the lint trap regularly.
- Avoid overloading the washer.
- Use the correct amount of detergent.
- Run a hot water cycle with vinegar once a month to help dissolve mineral deposits.
In a nutshell: Maintain a Smooth-Running Speed Queen Washer
By following these tips and troubleshooting steps, you can keep your Speed Queen washer draining properly and operating at its best. If you encounter any persistent drainage problems, do not hesitate to contact a qualified appliance repair technician.
Frequently Discussed Topics
Q: Why is my Speed Queen washer draining slowly?
A: A slow-draining washer can be caused by a partial clog in the drain hose, filter, or drainpipe.
Q: How often should I clean the drain pump filter?
A: It is recommended to clean the drain pump filter every 3-6 months, or more often if you notice that your washer is draining slowly.
Q: What is the best way to unclog a drainpipe?
A: You can use a drain snake or a chemical drain cleaner to unclog a drainpipe. However, it is important to follow the manufacturer’s instructions carefully to avoid damaging the drainpipe.
Q: Can I use bleach to unclog my Speed Queen washer drain?
A: No, it is not recommended to use bleach to unclog your Speed Queen washer drain. Bleach can damage the rubber components of the washer.
Q: How do I reset my Speed Queen washer?
A: To reset your Speed Queen washer, unplug the washer from the power outlet and wait 30 seconds. Then, plug the washer back in and restart the cycle.