5 Unbelievable Tricks To Drain Samsung Washer Like A Pro

When your Samsung washer malfunctions or simply requires a quick drain, knowing how to just drain Samsung washer can save you time and frustration. This comprehensive guide will provide step-by-step instructions and troubleshooting tips to help you drain your washer efficiently.

Step 1: Safety First

Before beginning the draining process, unplug the washer from the power outlet and turn off the water supply valves. This ensures your safety and prevents any electrical or water damage.

Step 2: Locate the Drain Hose

The drain hose is usually located at the back of the washer. It is a thin, flexible hose that connects the washer to the drainpipe.

Step 3: Extend the Drain Hose

Pull the drain hose out from the back of the washer. It may be coiled up or tucked away. Extend it to its full length.

Step 4: Place the Hose in a Drain

Position the end of the drain hose into a sink, bathtub, or bucket that can hold the water. Ensure that the hose is below the level of the washer to allow gravity to drain the water.

Step 5: Open the Drain Valve

There are two common types of drain valves on Samsung washers:

• Manual Drain Valve: Locate the small, white drain valve at the bottom of the washer. Turn it counterclockwise to open it.
• Emergency Drain Hose: Some models have an emergency drain hose hidden behind a small access panel on the front of the washer. Pull the hose out and direct it into the drain.

Step 6: Drain the Water

Allow the water to drain out of the washer through the hose. It may take several minutes for all the water to empty.

Step 7: Close the Drain Valve

Once the washer is drained, close the drain valve or replace the emergency drain hose.

Troubleshooting

Washer Won’t Drain Completely:

• Check if the drain hose is kinked or blocked.
• Ensure the drain valve is fully open.
• Clean the drain pump filter.

Water Leaking from the Drain Hose:

• Inspect the drain hose for holes or cracks.
• Tighten the hose connections at both ends.

Washer Stops Draining Mid-Cycle:

• Reset the washer by unplugging it for 10 minutes.
• Check if the drain pump is clogged or damaged.

Tips

• If the washer has a self-cleaning cycle, run it regularly to prevent clogs.
• Keep the drain hose clean by flushing it with hot water occasionally.
• Avoid overloading the washer, as this can strain the drain system.

Wrapping Up

Knowing how to just drain Samsung washer is a valuable skill that can save you time and hassle. By following these steps and troubleshooting tips, you can effectively drain your washer when needed. Remember to always prioritize safety and consult the user manual for your specific washer model for additional guidance.