Master The Code: A Comprehensive Guide To Maytag Washer Error Codes

Experiencing error codes on your Maytag washer can be frustrating, but understanding what they mean is crucial for resolving the issue efficiently. Here’s a comprehensive guide on how to get Maytag washer error codes and troubleshoot them effectively.

Displaying Error Codes

1. Check the Control Panel:
Most Maytag washers display error codes on the control panel. Look for a digital display or LED lights that indicate the error code.

2. Use the Diagnostic Mode:

• Turn the washer off and unplug it.
• Press and hold the “Start/Pause” and “Soil Level” buttons simultaneously.
• While holding the buttons, plug the washer back in.
• Release the buttons once the washer beeps.
• The error code will be displayed on the control panel.

Interpreting Error Codes

Maytag washer error codes typically consist of a letter followed by a number, such as “F01” or “OE”. Each code corresponds to a specific issue or component failure. Refer to the Maytag washer user manual or online resources for the specific meaning of each code.

Troubleshooting Common Error Codes

F01 (Door Lock Error):

• Ensure the washer door is securely closed.
• Check if the door latch or lock assembly is damaged or faulty.

OE (Overfill Error):

• Check the water supply hoses for kinks or leaks.
• Inspect the water inlet valve for proper operation.

F21 (Drain Error):

• Verify that the drain hose is not clogged or kinked.
• Check the drain pump for blockages or malfunctions.

F51 (Motor Error):

• Unplug the washer and wait a few minutes before plugging it back in.
• Check the motor connections for loose or damaged wires.

F70 (Temperature Sensor Error):

• Ensure the hot and cold water hoses are connected correctly.
• Check the temperature sensor for proper operation.

F81 (Pressure Sensor Error):

• Inspect the pressure sensor hose for leaks or blockages.
• Check the pressure sensor itself for proper functionality.

F91 (Control Board Error):

• Unplug the washer and wait a few minutes before plugging it back in.
• Contact Maytag support for further troubleshooting or repair.

Other Troubleshooting Tips

• Reset the Washer:
• Unplug the washer for 1-2 minutes and then plug it back in.
• This may clear minor error codes and reset the washer’s electronics.

• Check the Power Supply:
• Ensure the washer is properly plugged into a working outlet.
• Check the circuit breaker or fuse for any tripped or blown connections.

• Contact Maytag Support:
• If you are unable to resolve the error code using the above methods, contact Maytag support for professional assistance.

Final Note: Resolving Maytag Washer Error Codes

Getting Maytag washer error codes is not always a sign of a major issue. By following the steps outlined in this guide, you can effectively troubleshoot and resolve most common error codes. However, if you encounter persistent or complex error codes, do not hesitate to contact Maytag support for further assistance.

Basics You Wanted To Know

Q: How do I find the error code on my Maytag washer?
A: Check the control panel or use the diagnostic mode to display the error code.

Q: What does error code “F01” mean?
A: Door lock error. Ensure the door is securely closed or check the door latch/lock assembly.

Q: How do I fix error code “OE”?
A: Inspect the water supply hoses, inlet valve, and drain hose for leaks or blockages.

Q: What if I get error code “F91”?
A: Unplug the washer and contact Maytag support for professional assistance.

Q: Can I reset my Maytag washer to clear error codes?
A: Yes, unplug the washer for 1-2 minutes and then plug it back in to reset the electronics.

Q: Where can I find the Maytag washer user manual?
A: Refer to the Maytag website, appliance store, or search online for the specific model.