Breakthrough Solution: Reviving Your Lagging Lg Dryer Start Button

A malfunctioning dryer start button can be a major inconvenience, leaving you with a pile of wet laundry and a frustrating situation. LG dryers are known for their reliability, but even they can experience issues from time to time. If your LG dryer’s start button isn’t working, don’t despair. This comprehensive guide will provide you with step-by-step instructions on how to diagnose and troubleshoot the problem, empowering you to fix it yourself and restore your dryer’s functionality.

Safety Precautions

Before embarking on any repair, it’s crucial to take safety precautions to avoid electric shock or further damage to your dryer.

• Unplug the dryer from the power outlet.
• Allow the dryer to cool down completely.
• Wear insulated gloves for protection.

Tools and Materials

To complete the repair, you’ll need the following tools and materials:

• Screwdriver (Phillips and flathead)
• Multimeter
• Replacement start switch (if necessary)

Troubleshooting Steps

1. Check Power Supply

• Ensure the dryer is plugged into a working power outlet.
• Check the circuit breaker or fuse panel for tripped breakers or blown fuses.

2. Inspect the Start Button

• Visually inspect the start button for any physical damage, such as cracks or broken parts.
• Clean the button with a cotton swab dipped in isopropyl alcohol.
• Check if the button is loose or misaligned.

3. Test the Start Switch

• Using a multimeter, set it to the ohms setting.
• Disconnect the wires from the start switch.
• Touch the multimeter probes to the terminals of the switch.
• If the switch is working properly, the multimeter should display a reading of 0 ohms.

4. Inspect the Door Switch

• The door switch ensures the dryer door is closed before the start button can be activated.
• Open and close the dryer door several times to check if the switch is functioning correctly.
• If the door switch is faulty, the dryer won’t start even if the start button is pressed.

5. Check the Control Board

• The control board is responsible for controlling the dryer’s functions.
• Remove the control panel and inspect the board for any signs of damage, such as burnt components or loose connections.
• If the control board is faulty, it may need to be replaced.

6. Replace the Start Switch

• If the start switch has failed the multimeter test, it needs to be replaced.
• Disconnect the wires from the old switch and connect them to the new one.
• Secure the new switch in place.

7. Reassemble the Dryer

• Once the repair is complete, reassemble the dryer by reversing the disassembly steps.
• Plug the dryer back into the power outlet and test the start button to ensure it’s working correctly.

Tips for Maintenance

To prevent future issues with your LG dryer‘s start button, follow these maintenance tips:

• Keep the start button clean and free from debris.
• Avoid overloading the dryer to prevent excessive strain on the start button.
• Have the dryer serviced regularly by a qualified technician.

Key Points: Troubleshooting Success

Fixing a broken LG dryer start button can be a challenging but rewarding task. By following the steps outlined in this guide and taking the necessary safety precautions, you can diagnose and troubleshoot the problem effectively. With a little patience and attention to detail, you’ll have your dryer back up and running in no time.

Frequently Asked Questions

Q: Why is my LG dryer start button not working?
A: There could be several reasons, including a faulty start switch, door switch, control board, or power supply issue.

Q: Can I fix the LG dryer start button myself?
A: Yes, it’s possible to fix it yourself if you have basic electrical knowledge and follow the steps in this guide.

Q: How do I know if the start switch is faulty?
A: Use a multimeter to test the switch for continuity. If it doesn’t display a reading of 0 ohms, it’s likely faulty.

Q: What is the cost of replacing the start switch?
A: The cost of a replacement start switch varies depending on the model of your dryer, but it typically ranges from $20 to $50.

Q: How long does it take to replace the start switch?
A: With proper preparation, you can replace the start switch in about 30 minutes to an hour.

Q: Is it safe to use a dryer with a broken start button?
A: No, it’s not safe to use a dryer with a broken start button as it could pose a fire hazard or cause further damage to the dryer.