Unlock The Secret To Fixing Your Kenmore Dryer Timer In Minutes

If your Kenmore dryer‘s timer is acting up, don’t despair. With a few simple troubleshooting steps, you can often fix the problem yourself. In this comprehensive guide, we’ll walk you through the process of diagnosing and repairing a faulty Kenmore dryer timer.

Identifying the Problem

Before you start any repairs, it’s important to identify the exact problem with your dryer’s timer. Here are a few common symptoms:

• The timer doesn’t advance at all.
• The timer advances too quickly or too slowly.
• The timer stops prematurely.
• The dryer won’t start even though the timer is set.

Troubleshooting and Repair Steps

Once you’ve identified the problem, you can start troubleshooting and repairing the timer. Here are the steps to follow:

1. Check the Power Supply

Make sure that the dryer is plugged in and that the power cord is securely connected. If the power cord is damaged, it will need to be replaced.

2. Inspect the Timer Knob

Check if the timer knob is loose or damaged. If it’s loose, tighten it. If it’s damaged, it will need to be replaced.

3. Clean the Timer Contacts

Over time, the timer contacts can become dirty or corroded. To clean them, use a soft cloth and some rubbing alcohol.

4. Test the Timer Motor

The timer motor is responsible for advancing the timer. If it’s not working properly, the timer won‘t advance. To test the timer motor, use a multimeter to check for continuity. If there is no continuity, the timer motor will need to be replaced.

5. Replace the Timer

If the troubleshooting steps above don’t solve the problem, you may need to replace the timer. To do this, you’ll need to remove the front panel of the dryer and disconnect the wires from the timer. Once the timer is disconnected, you can remove it from the dryer and replace it with a new one.

6. Adjust the Timer

After replacing the timer, you may need to adjust it. To do this, turn the timer knob to the desired setting and then press the start button. The timer should advance to the next setting after the specified amount of time.

7. Reset the Dryer

Once the timer is adjusted, reset the dryer by unplugging it for a few minutes and then plugging it back in. This will clear any error codes and allow the dryer to start again.

Final Thoughts

If you’re experiencing problems with your Kenmore dryer timer, don’t hesitate to troubleshoot and repair it yourself. By following the steps outlined in this guide, you can save yourself the cost of a professional repair.

Frequently Asked Questions

Q: How can I prevent my Kenmore dryer timer from breaking?

A: To prevent your Kenmore dryer timer from breaking, you should clean it regularly and avoid overloading the dryer. You should also avoid using the dryer in a humid environment.

Q: How much does it cost to replace a Kenmore dryer timer?

A: The cost to replace a Kenmore dryer timer varies depending on the model of your dryer. However, you can expect to pay between $50 and $150 for a new timer.

Q: How long does it take to replace a Kenmore dryer timer?

A: Replacing a Kenmore dryer timer is a relatively easy repair that can be completed in about an hour. However, the time it takes to complete the repair will vary depending on your experience level.