Diy Rescue: How To Repair A Kenmore Dryer Not Spinning In 5 Easy Steps

Is your Kenmore dryer not spinning, leaving your clothes damp and frustrating? Don’t worry; you’re not alone! This common issue can be caused by various factors. In this comprehensive guide, we’ll delve into the reasons why your dryer may not be spinning and provide step-by-step instructions on how to fix it.

Inspect the Drive Belt

The drive belt is a crucial component responsible for transmitting power from the motor to the dryer drum. If the belt is loose, worn, or broken, it can prevent the drum from spinning.

1. Unplug the dryer and disconnect the power.
2. Open the back or front panel (depending on your dryer model).
3. Locate the drive belt, usually wrapped around the motor pulley and the drum pulley.
4. Check if the belt is loose or has any cracks or tears.

Replace the Drive Belt

If the drive belt is damaged, it needs to be replaced.

1. Purchase a new drive belt compatible with your Kenmore dryer model.
2. Remove the old belt by loosening the tensioner pulley.
3. Install the new belt by looping it around the pulleys and tightening the tensioner pulley.
4. Reconnect the power and plug in the dryer.

Check the Motor

The motor is the heart of the dryer, providing the power to spin the drum. If the motor is faulty, it can prevent the dryer from spinning.

1. Unplug the dryer and disconnect the power.
2. Access the motor by removing the back or front panel.
3. Inspect the motor for any damage or corrosion.
4. Use a multimeter to test the motor for continuity and resistance.

Replace the Motor

If the motor is faulty, it needs to be replaced.

1. Purchase a new motor compatible with your Kenmore dryer model.
2. Disconnect the wires from the old motor.
3. Remove the bolts holding the motor in place.
4. Install the new motor and connect the wires.
5. Reconnect the power and plug in the dryer.

Inspect the Drum Rollers

The drum rollers support the dryer drum and allow it to rotate smoothly. If the rollers are worn or damaged, it can create friction and prevent the drum from spinning.

1. Unplug the dryer and disconnect the power.
2. Tilt the dryer on its side to access the bottom.
3. Locate the drum rollers, usually four or six in number.
4. Check if the rollers are cracked, worn, or have any debris stuck in them.

Replace the Drum Rollers

If the drum rollers are damaged, they need to be replaced.

1. Purchase new drum rollers compatible with your Kenmore dryer model.
2. Remove the old rollers by pulling them out of their sockets.
3. Insert the new rollers into the sockets and push them in until they click into place.
4. Reconnect the power and plug in the dryer.

Check the Door Switch

The door switch ensures that the dryer only operates when the door is closed. If the door switch is faulty, it can prevent the dryer from spinning.

1. Unplug the dryer and disconnect the power.
2. Locate the door switch, usually on the door frame.
3. Use a multimeter to test the switch for continuity and resistance.

Replace the Door Switch

If the door switch is faulty, it needs to be replaced.

1. Purchase a new door switch compatible with your Kenmore dryer model.
2. Disconnect the wires from the old switch.
3. Remove the screws holding the switch in place.
4. Install the new switch and connect the wires.
5. Reconnect the power and plug in the dryer.

In a nutshell

Fixing a Kenmore dryer not spinning can be a straightforward task if you follow the steps outlined above. By inspecting and replacing the necessary components, you can restore your dryer to its optimal performance and keep your clothes dry and fresh.

Frequently Asked Questions

Q: Why is my Kenmore dryer not spinning, but it makes a humming noise?
A: This could indicate a faulty motor or a problem with the drive belt.

Q: What is the average cost of replacing a dryer motor?
A: The cost can vary depending on the model of your dryer, but it typically ranges from $150 to $300.

Q: How can I prevent my dryer from not spinning in the future?
A: Regular maintenance, such as cleaning the lint filter and inspecting the belt, can help prevent future problems.