Defective Frigidaire Dishwasher Control Panel? Here’S The Step-By-Step Guide To Fix It
What To Know
- If your Frigidaire dishwasher is malfunctioning, the control panel may be the culprit.
- Open the dishwasher door and locate the control board, typically situated behind the control panel.
- If the above steps don’t resolve the issue, you may need to replace the control panel.
If your Frigidaire dishwasher is malfunctioning, the control panel may be the culprit. Fortunately, many control panel issues can be resolved with a little troubleshooting and repair. This comprehensive guide will walk you through the steps to diagnose and fix your dishwasher’s control panel.
Identifying Common Control Panel Problems
- No response: The control panel doesn’t respond to any button presses or touch inputs.
- Erratic behavior: The buttons or touchpads may respond intermittently or perform unintended actions.
- Display issues: The display may be dim, flickering, or displaying error codes.
- Cycle not starting: The dishwasher doesn’t start when you select a cycle.
- Leaking water: Water may leak from around the control panel.
Troubleshooting and Repair Steps
1. Reset the Dishwasher
- Unplug the dishwasher for 1 minute and then plug it back in.
- Press and hold the “Start/Cancel” button for 5 seconds to reset the dishwasher.
2. Check the Power Supply
- Ensure that the dishwasher is receiving power from the electrical outlet.
- Inspect the power cord for any damage or loose connections.
- Check the circuit breaker or fuse for the dishwasher and reset it if necessary.
3. Clean the Control Panel
- Wipe down the control panel with a damp cloth to remove any dirt or debris.
- Use a cotton swab dipped in isopropyl alcohol to clean the buttons or touchpads.
4. Inspect the Control Board
- Open the dishwasher door and locate the control board, typically situated behind the control panel.
- Check for any loose connections or burnt components on the board.
- If necessary, disconnect the control board and reconnect it to ensure a secure fit.
5. Replace the Control Panel
If the above steps don‘t resolve the issue, you may need to replace the control panel.
- Order a new control panel compatible with your dishwasher model.
- Disconnect the old control panel and connect the new one.
- Follow the manufacturer’s instructions for installing the new control panel.
6. Contact Frigidaire Support
If you’re unable to resolve the issue yourself, contact Frigidaire support for further assistance.
- Call the Frigidaire support line at 1-800-374-4432.
- Describe the problem you’re experiencing and provide the model number of your dishwasher.
- A technician may be dispatched to your home to diagnose and repair the issue.
Tips for Preventing Control Panel Issues
- Keep the dishwasher clean and free from food particles.
- Avoid overloading the dishwasher.
- Use the correct detergent and rinse aid.
- Regularly inspect the control panel for any signs of damage.
Information You Need to Know
Q: What if the display on my control panel is flickering or dim?
A: Check the power supply and ensure that there are no loose connections. Replace the control board if necessary.
Q: Why is my dishwasher not starting when I select a cycle?
A: Check the door latch and ensure that it’s securely closed. Reset the dishwasher and check the control board for any issues.
Q: How can I prevent water leaks around the control panel?
A: Make sure that the control panel is properly installed and there are no gaps or cracks around it. Check for any loose connections or damaged seals.
