Bypass The Drain Hose: Learn The Quick And Easy Way To Drain Your Whirlpool Washer Manually
What To Know
- If there is a power outage during a wash cycle, the washer will not be able to complete the drain cycle.
- Once the drain hose is reconnected, plug the washer back in and turn on the water supply.
- To check it, locate the drain pump at the bottom of the washer and listen for a humming noise when the washer is in the drain cycle.
If your Whirlpool washer is giving you trouble draining, don’t panic! Draining it manually is a relatively simple task that can be completed with a few simple steps. In this comprehensive guide, we will walk you through the process of how to drain whirlpool washer manually, providing detailed instructions and troubleshooting tips along the way.
Why Drain Your Whirlpool Washer Manually?
There are several reasons why you may need to drain your Whirlpool washer manually:
- Clogged drain hose: A buildup of lint, hair, or other debris can obstruct the drain hose, preventing water from flowing out.
- Malfunctioning drain pump: The drain pump is responsible for pumping water out of the washer. If it fails, water will not be able to drain.
- Power outage: If there is a power outage during a wash cycle, the washer will not be able to complete the drain cycle.
- Overfilling: If the washer is overfilled, it may not be able to drain properly.
Safety Precautions
Before you begin draining your Whirlpool washer manually, it is important to take the following safety precautions:
- Unplug the washer from the power outlet.
- Turn off the water supply to the washer.
- Wear gloves to protect your hands from sharp objects.
Step-by-Step Instructions
1. Locate the Drain Hose
The drain hose is typically located at the back of the washer, near the bottom. It is a flexible hose that connects the washer to the drainpipe.
2. Disconnect the Drain Hose
Disconnect the drain hose from the drainpipe by pulling it off the pipe. Place a bucket or large container under the hose to catch the water that will drain out.
3. Clear the Drain Hose
Inspect the drain hose for any clogs or obstructions. If you find any, use a pair of pliers or a wire hanger to remove them.
4. Reconnect the Drain Hose
Once the drain hose is clear, reconnect it to the drainpipe. Make sure the connection is secure to prevent leaks.
5. Reset the Washer
Once the drain hose is reconnected, plug the washer back in and turn on the water supply. Run a short rinse cycle to test if the washer is draining properly.
Troubleshooting
If you are unable to drain your Whirlpool washer manually using the steps above, there may be a more serious problem. Here are some common troubleshooting tips:
- Check the drain pump: The drain pump may be clogged or malfunctioning. To check it, locate the drain pump at the bottom of the washer and listen for a humming noise when the washer is in the drain cycle. If you do not hear a humming noise, the drain pump may be faulty.
- Check the drain filter: The drain filter is located at the bottom of the washer, behind a small access panel. Remove the panel and clean the filter of any debris.
- Call a plumber: If you are unable to resolve the issue yourself, call a qualified plumber for assistance.
Tips for Preventing Clogs
To prevent clogs from forming in your Whirlpool washer, follow these tips:
- Clean the lint filter regularly.
- Run a hot water cycle with bleach every few months to disinfect the washer and prevent mold buildup.
- Avoid overloading the washer.
- Do not wash items that are excessively dirty or contain large amounts of lint.
Wrapping Up
Draining your Whirlpool washer manually is a relatively simple task that can be completed in a few minutes. By following the steps outlined in this guide, you can resolve most common drain problems and get your washer back up and running in no time. If you encounter any difficulties or suspect a more serious problem, do not hesitate to contact a qualified plumber for assistance.
Frequently Asked Questions
Q: How often should I drain my Whirlpool washer manually?
A: You should only need to drain your Whirlpool washer manually if it is clogged or if there is a power outage.
Q: Can I use a wet/dry vacuum to drain my Whirlpool washer?
A: Yes, you can use a wet/dry vacuum to drain your Whirlpool washer. However, be sure to use the appropriate attachment and follow the manufacturer’s instructions to avoid damaging the vacuum.
Q: What if I cannot locate the drain hose?
A: If you cannot locate the drain hose, consult your Whirlpool washer’s user manual or contact a qualified plumber for assistance.